loading kernel

[Bulld0g]

You do not need a null modem to flash with IFA but it almost guarantees first time flashing. Using IFA again, give your ethernet a static ip address make sure your firewall is off and try again m8. There is a portable version in downloads and i always seem to flash first time using that.

[Dannyjk7615]

Chrz m8, i went into the downloads section and was able to download now
so i got the portable IFA .... amoungst some other files

i hope it works.


i set my ip as a static one before, is there a Ip Range i should be in?

when my box was working i was networked through my router and the dbox IP was 192.168.2.5

but it doesnt ping that address no more even with the direct connection through the crossover.

anyways im gunna fiddle

back later with a status update

peace +DjK+

[Dannyjk7615]

It's A Done Deal

I did it W00000000......IM THE KING OF THE WORLD, hahahaha....that's how i feel anyways


i followed this

You can get IFA from here

http://www.dboxservice-hallenberg.de/?referer=dboxifa_menu

then if you struggle follow this guide

Thanks to Fergalsworld

You really need to get a nullmodem cable and your worries will go away
but until you do try this.
Check you have done all this
Go to control panel then network connections
right click on local area connect and pick properties.
there you will see underneath connect using....your network card
next to this will be a configure tab click on it.
then click on the advanced tab
you need to look for flow control, duplex, media type or connection type
drop the value tab arrow down and set to 10baseT_halfduplex or try automatic or autosense
Then
1.Install IFA in to C:/ check that IFA has been Added to the exceptions in windows firewall,then turn the firewall off,
2.Disable ALL antivirus programs...If you have any Norton crapware disable worm blocking aswell
you might even have to unistall it this includes systemworks aswell
there is a removal tool in the downloads to get rid of anything norton leaves behind
3.Disable any [COLOR=green! important][COLOR=green! important]popup [COLOR=green! important]stoppers[/COLOR][/COLOR][/COLOR].
4.Give your pc network card a static ip.
IE:PC ip:192.168.1.201 (not needed with ifa but set to this anyway)
subnet mask 255.255.255.0
5.Disable any other network cards you have installed including wireless
6.Disable ics (internet card sharing if available)
7.Ethernet crossover cable connected
8.Nullmodem cable connected if you have one
9.Turn off box,
10.Put Image in C:/ and rename it to mtd3.img
11.Start IFA
12.Select networkcard
13.Tick nullmodem if you have one
14.Select image in C:/
15.Press ok, if it goes to a comm window turn on the box.
16.If you dont get flashing in the lcd on the box try holding the power and up button in till the lcd goes blank
then let go wait about 10 seconds
keep trying a few times.

Nullmodem cable required to do the following.
hold power and up button in till lcd goes blank then let go of power button then up button 2 seconds later
it will go through 3 tests in com window then stop at
dbox ppcboot> type in "boot net" then press enter
if it does not start to flash
then something is still blocking the network.
Hope this helps.


but i only used my homemade cross over cable, no null modem cable

and i also disabled hyperthreading for my pentium 4 in the bios

i used Portable Image Flashing Assistant 3.1
to flash my sagem DboxII with the Commando 9.25 1xl image

it flashed within 5 minutes

Im so Happy

I hope this info will help anyone else having similar problems

much R11SPECT to those that helped a brotha

peace +DjK+