I think it's bricked, anything I can try?

[Danril]

Managed to get the lid off by trying several different screwdrivers (again, this is a first for me) and can't believe what I'm seeing.

It's absolutely cram jam packed full of dust, there's a massive ball of fluff and the whole 9 yards! It's absolutely disgusting. Careful cleaning job required!

[Danril]

New log:


debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
.................................................. .............
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 619057 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 618993 Bytes = 604.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (sportster@bar-wsl01) (gcc version 3.3.5) #21 So Jun
19 18:44:54 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30888k available (1052k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:40:2a:3c
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
route: SIOC[ADD|DEL]RT: Network is unreachable
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v001A
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_proc.o
avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2003/09/25 12:24:00 Skars & Merandos
Exp $
avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension
options:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=0
(clr avia reg) avia=1
(enx td trace) trace=1
(lock, unlock) spinlock=0
Schreiben ueber avia_gt.o
(delay) delay=10
Starting pid 78, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. cdkVcInfo $Id: cdkVcInfo.c,v 1.0 20
02/09/26 20:48:26 alexW Exp $

setze Datum...
Thu Jan 1 01:00:00 GMT 1970
starte sectionsd...
$Id: sectionsd.cpp,v 1.184 2005/05/02 19:06:35 rasc Exp $
caching 168 hours
events are old 60min after their end time
starte timerd...
starte Camd..
Please wait evocamd (max. 5 Seconds)
evocamd started successfully
starte zapit...
Couldn't open config file: /var/keys/newcamd-client.txt
========================================
(compiled May 9 2005 10:35:54)
styled by TBT Team, Version 55 (dream-dbox2-Triple Dragon)
========================================
$Id: zapit.cpp,v 1.371 2005/04/17 06:56:15 metallica Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[evocamd] Process id 175
[camd] ca system id: 1702
/var/tuxbox/config/zapit/antiservices.xml: No such file or directory
/var/tuxbox/config/zapit/myservices.xml: No such file or directory
[camd] a card is in slot #2
[camd] no card is in slot #1
starte controld...
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

starte nhttpd...
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
starte neutrino...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[english.locale] missing entry: flashupdate.proxypassword_hint2
[english.locale] missing entry: timerlist.repeatcount.help2
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[neutrino] initialized everything
PES, queue 0 normal.
[CBasicClient] connect failed.
avia_gt_core: masking unhandled irq reg 1 bit 15
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
Config file not found,camd35 client disabled!!
Sec len 2A Info len 0 sid CB ...
|== ECM: CaID: 0x1800 -> CaPID: 0x02E3 ProvID: 000000 ==|
CA_SET_PID: Invalid argument
[CBasicClient] connect failed.
[timeThread] time(): 07.03.2009 11:07:25, tim: Sat Mar 7 11:07:25 2009
[camd] camd starting..
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock06: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock07: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock08: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock09: No such file or directory
ECM : 0 EMM : 0 KeyUPDATE 1 AU : 1 dir : 0 OSD : 0 NETMODE : 0 CONF_RELOAD : 0 U
DP_LOG : 0 IP : 192.168.254.99 PORT :10000
[camd] AU thread started
[timeThread] time(): 07.03.2009 11:07:26, tim: Sat Mar 7 11:07:26 2009
|== EMM: CaID: 0x1800 -> CaPID: 0x0080 ProvID: 000000 ==|
3f filter
missing/failed ROM 9 (/var/scce/nagrarom10.bin)
3f filter
3f filter
3f filter
missing/failed ROM 10 (/var/scce/nagrarom11.bin)
3f filter
3f filter
3f filter


I'm not connected to a TV so I'm not 110% BUT the box is giving the correct time which infers it is working!

Going to connect to a TV and confirm....

[Danril]

Well, that looks like it's done it! Result!

Fergal, plasterer; I can't thank you enough for your help on this issue. I've learned quite a bit this last few days and feel vindicated now for sticking with it!

Not going to count my chickens just yet, will see how it goes for the next few days. Thank you again though, I really, really appreciate it!

[Fergal]

Well, that looks like it's done it! Result!

Fergal, plasterer; I can't thank you enough for your help on this issue. I've learned quite a bit this last few days and feel vindicated now for sticking with it!

Not going to count my chickens just yet, will see how it goes for the next few days. Thank you again though, I really, really appreciate it!

evocamd] Process id 175
[camd] ca system id: 1702
The above means the SEC chip is ok for now
there could have been a bit of crap on the SEC chip legs causing it or a dry solder joint on the legs somewhere if it happens again check the boot log for the error if it reads
[evocamd] Process id 175
[camd] CA_SEND_MSG: Remote I/O error
unplug from mains and gently push the sec chip down onto the board see if that fixes it DONT do it know as it working .

[Danril]

Given the amount of grime in the box it must have been having some effect. Dusting the legs of the chip just wasn't an option, the entire contents of the box was entirely coated with dust and detritus.

I'm quite hopeful that's cracked it but, as you say, I'm not going to do anything with it now!

[PaphosAL]

If it's a Nokia, then it's a good idea to remove the telephone modem board and bin it. This results in less work for the PSU to do (therefore less heat output from there)- and also allows a better cooling flow of air around the tuner can, positioned right alongside it.

Cheers- AL

[Danril]

I deffo wont have all the relevant tools etc required to do it but will have a look at it all the same. TBH that's probably a bit beyond me as things stand but a week ago getting the box working was beyond me, so never say never!

[plasterer]

Nokia removel of the mowdem
A screw driver and a sharp pull will remove it from the box
2 Min Job..............Paul

[Fergal]

Take the screw out of the modem on the backplate slightly loosen the tuner screw
then just gently pull the backplate away from the tuner a little bit then just pull the modem out like you do with a pc card then tighten the tuner screw up again

[Danril]

Sounds simple enough. Will have a look at it in the coming days, feeling quite chuffed with my efforts so I'm off for a couple of beers!

[Danril]

Got that done this morning, easy job. Nice one guys for the heads up on that.