Need help DBOX2 after flashing

[MetMan]

Ahh sorry u misunderstand me i flash the images ok using hyperterminal everything looks fine but the box ends up sticking on

c:\windows

loading kernel

or lade and resettting constantly

try this version of ifa....works on my xp but thru router....

setup_dboxifa_en.rar

IFA Image Flashing Assistant TuT.pdf

think u have to disable the other network card

[ahay]

Still no joy

Im begining to give up here hehe

[Fergal]

Install dboxmanager untick everything except com and set to 9600
click start it should go to the com window if it does hold the up button in on the box and power it up
let go of the up button a few seconds later
it will do 3 march tests then stop post what you get.

[ahay]

DBox Manager Screenshot

Attached is an image of dbox manager output

[ahay]

Going back too hyperterminal

Going back too hyperterminal at least it was flashing the image but still not loading

Anyone have suggestions on clean image for nokia dbox2

[DW190]

Going back too hyperterminal at least it was flashing the image but still not loading

Anyone have suggestions on clean image for nokia dbox2

Go back to an old Sportster Image and flash with IFA. The one in the link below is the Ultra has both 1.02 & 1.73 (it will only scan in 1.73 mode, this can be changed by pressing blue button, blue button again and toddle to preferred one).

When using IFA make sure you select the extracted image. With the box powered up hit the start button, you will be prompted to hit OK then power up the box. Just hit OK then count to 3, unplug and plug back in.

When complete close the IFA before rebooting the box or the flash will start again.

http://www.4shared.com/file/84499831/cfe0e0d3/Cryo_Sportster_Pro_102_Ultra14b_2x.html

http://www.4shared.com/file/95416732/5f7ba6e9/dbox_ifa.html

[ahay]

Ill try that

i just about finished a ht flash, if that dont work ill try what u suggested

[DW190]

i just about finished a ht flash, if that dont work ill try what u suggested

Where abouts are you in UK?

[ahay]

Dumbarton

Heres the log from last try looks like the tftp aint working

[Fergal]

Make sure your networkcard is set to 10baseT_halfduplex or 10half mode and disable any antivirus and firewalls
also try this version of ifa
Digital Kaos - Downloads - DBOX2 Portable_Image-Flashing-Assistent

[ahay]

Thats the same as the version i tried earlier stops on

Freeing unused kernel memory: 72k init

[Fergal]

Thats the same as the version i tried earlier stops on

Freeing unused kernel memory: 72k init

It does not seem to be flashing is your networkcard is set to 10baseT_halfduplex or 10half mode

[ahay]

It only has option for 10 half mode so i have that set

[plasterer]

Kill all your Fire walls
And make sure

you need to look for flow control, duplex, media type or connection type
drop the value tab arrow down and set to 10baseT_halfduplex or try automatic or autosense

Sorry Fergal you was posting while i was searching ......Paul

[ahay]

Think ive run out of options i guess its gonna be a door stop

Thanks for the help everyones that contributed