Problems with Flash FXP - Help?

[hendinho]

Right - i'm running Blade Quad 1x on a Sagem DBox2 (flashed okay)
Computer IP: 213.106.193.212
Router IP: 192.168.1.1 (found on a web site)

with DBox connected to the TV i went into Settings -> Network
and chaged the following
ip address to 213.106.193.213
default gateway to 192.168.1.1
dns server to 213.106.193.212

Then i connected dbox via ethernet cable to my router and turned it on

Ran Flash FXP
Try to connect to dbox by entering
IP: 212.106.193.213
Port: 21
User: root
Password: ive tried dbox and dbox2

and it wont connect so i can't transfer keys etc...

feeling helpless

Any ideas?

[tottenhamyid]

DNS server should be set to 192.168.1.1, this should be the same as your gateway. Give that a go, should be ok

Tottenhamyid

[hendinho]

just tried that and still no joy..........
i've just no idea

[MetMan]

just tried that and still no joy..........
i've just no idea

check ur pc ip and router address, command prompt >ipconfig /all

ipaddy3.JPG

or try >arp -a

arp2.JPG

[hendinho]

so.... i'm assuming i change IP of the dbox to 192.168.1.102? one number diff to my PC IP?

[MetMan]

so.... i'm assuming i change IP of the dbox to 192.168.1.102? one number diff to my PC IP?

personally i switch bsck to dynamic let your pc find its own address within the range of ur router....likely to be 192.168.1.2 or 102 then set ur dbox settings.....

[hendinho]

cheersforthis - it was my brothers PC he gave me so how would i go about switching "it" backto dynamic?

[MetMan]

cheersforthis - it was my brothers PC he gave me so how would i go about switching "it" backto dynamic?

control panel - network settings - right click on adapter -properties -internet protoocol (TCP/IP) - props - obtain ipaddress automatically / ok

[hendinho]

using vista so wasn't that stright forward but found what i believe to be the right bit and there are two diff ones - both already set to auto obtain IP

based on the info above what settings do you suggest i try in the dbox?
give it an IP one away from my PC IP? e.g 192.168.1.102?

[MetMan]

using vista so wasn't that stright forward but found what i believe to be the right bit and there are two diff ones - both already set to auto obtain IP

based on the info above what settings do you suggest i try in the dbox?
give it an IP one away from my PC IP? e.g 192.168.1.102?

yep ....start /reset then try to ping / test network u r looking for 4 pings - takes a little while

[hendinho]

1st = (ping)
2nd and 3rd are apparently unreachable

as well as the 4th

[MetMan]

1st = (ping)
2nd and 3rd are apparently unreachable

as well as the 4th

try 202 and ping or

try dbox 192.168.1.103
gateway 192.168.1.1
server 192.168.1.102

or

dbox 192.168.1.203
gateway 192.168.1.1
server 192.168.1.202

or

try dbox 192.168.1.102
gateway 192.168.1.1
server 192.168.1.101

[hendinho]

same result i'm affraid.i though the default gateway and dns server where meant to be the same?

[Fergal]

Right click on your pc nic choose properties then configure tab then advanced and set flow control,duplex or media type (could be called something else also) to 10baseT_halfduplex or 10half mode

[MetMan]

same result i'm affraid.i though the default gateway and dns server where meant to be the same?

no the server is the pc that's connected to the router the gateway is the router

did u try the last address i posted, if so go into ie h**p://192.168.1.1/

and check ur router settings - starter ip adress 192.168.1.100 on the basic set up page

linksys2.JPG