Dbox not working right

[Scelero]

Yeah like i say i flashed theblade quad image to it last night but cant do anythign else now

[MetMan]

try this version of ifa anti virus , firewalls off

IFA Image Flashing Assistant TuT.rar

setup_dboxifa_en.rar

never let me down....what OS u using

[mept1]

have you tried the web interface?,..type the box ip into your browser,...just a thought

[Scelero]

ok so i tried those fiels metman but it keep scomign up saying retry count exceeded trying again this is when its trying to load the logo.lcd file i beleive

[MetMan]

ok so i tried those fiels metman but it keep scomign up saying retry count exceeded trying again this is when its trying to load the logo.lcd file i beleive

shouldn't get that far....switch box off at mains = load ifa on pc and load img and press ok then switch on box at mains - should see FLASHING in lcd....follow the instructions

[Scelero]

Ok this is what comes up in the screen when i try
?debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.0.0.253, My IP 10.0.0.202
debug: Sending TFTP-request for file C/ppcboot27443/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-15-4e-03
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 0.0.0.0; our IP address is 10.0.0.254; sending throught gateway 10.0.0.1
Filename 'logo-lcd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 0.0.0.0; our IP address is 10.0.0.254; sending throught gateway 10.0.0.1
Filename 'logo-lcd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *T T T T
------ Systeminformations ------
Selected networkdevice: VIA Compatable Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 10.0.0.102
IP-address which the dbox gets: 10.0.0.202
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
------ Powered by Hallenberg.com ------

[MetMan]

"Turn off windows firewall
Disable wireless network connection

Rename image file mtd3.img and store it in C:\

set Local Area Connection network IP to 192.168.0.201
( IFA automatically sets dbox IP to 192.168.0.202 )
configure Local Area Connection link speed / duplex mode to 10Mbps / half duplex

open IFA
select image for flashing ( mtd3.img from C:\ )
select network device ( there should only be one available )
switch dbox on
press start
a dialogue box pops up
switch dbox off
click ok
switch box on
flashing should begin
progress is indicated on LCD ( IFA image on TV screen )
Fertig and smiley faces on LCD means success
disconnect network
off then on at the mains

The flash process takes three or four minutes.

you could try this method not my method - rodboy's

[Scelero]

Ok well i think metman your a genious i managed to flash a new image to the box so will now test see if it works If your ever in Yorkshire ill buy you a couple of pints no worries