Eurovox 2006 stuck on standby! HELP!

[J381]

Had a look at that but it still isnt working!

Tried both symbol rates, and also bypass my splitter!

Is it anything to do with my area cdf?

Im located in the Falkirk area, between Glasgow and Edinburgh.

Im pickled now!!

Any ideas guys???

[J381]

Anyone any ideas?

[J381]

Im still stuck with this issue!!

[delboy13]

try a factory reset select your symbol rate.then do a powerscan see how you get on

[J381]

Tried that mate.

Any other ideas???

[HiTeck]

What symbol rate have you tried using you should be using 6952 for your area? also make sure your cable feed is plugged into the RF-IN and not the ANT socket at the back of the box.

[J381]

Right, i've changed the symbol rate to 6952 and made sure the cable is in the 'RF-IN' port, but still nothing!!

This is the screen im getting after changing the symbol rate. The quality bar never goes past 29% ???

Also, are my rated correct???

Please help.

Cheers.

[J381]

Anyone any ideas???

This is driving me nuts now because i know it cant be anything too serious!

[J381]

What is VM by the way???

[J381]

Anyone got any ideas?

Please...

[satsmo]

I know you say you changed the SR did you try 6887 also? Was this box working before these problems?

Have you tried it at a friends or familys house?

[J381]

I know you say you changed the SR did you try 6887 also? Was this box working before these problems?

Have you tried it at a friends or familys house?

Tried both mate.

I will try it at someone elses house, see if it works there.

I checked if it was a clone or not, but what if i got it wrong and uploaded the genuine firmware onto a clone - could this be an issue? Is there firmware for clones?

[satsmo]

Yes there is clonesafe firmware but try it elsewhere first and post back the results.

[J381]

Its more hassle to try it elsewhere than it would be uploading the clone firmware.

Can you post a link to the correct firmware for a cloned Eurovox Max 2006 (blue)?

[brian.farrell]

can someone tell me what the c14 is, im trying to fix a blue eurovox that is stuck on standby. i belive the correct firmware is installed cheers