no channels found

[stecollins]

thanks hitec ive tried this and even tho the deep scan says could take up to 2 hours ive done it and it took less than that and still no transponders, im really at the throw the box thru the window stage now so anything else i can try?

[HiTeck]

Can you try that box at a friends house to rule out any faults with it. You could try turning the signal booster on in TV settings you will then have to reboot the box and factory default and powerscan again.

[stecollins]

i dont know if this means anything but the quality bar is fluctuating in the red between 2% up to 31%. it was the scanning page where it was up in the high green signal strength

[stecollins]

how do i turn on the signal booster and reboot the box please pal?

[stecollins]

also when i put the box on standby the time is wrong completely does this mean anything??

[HiTeck]

As said above it is in the TV settings, Press menu, config, OK on TV settings, you should see it at the bottom of the page, turn it on save and exit then reboot, factory default then another power-scan, I cant understand why the deep scan finished so quickly, are you setting it to

start at 100.00
stop at 850.00
symbol rate 6887,
symbol rate 0.000
symbol rate 0.000
symbol rate 0.000.
step 8

[stecollins]

im on the tv settings menu at the moment and there isnt anything that says signal boost,
tv mode--multi
tv aspect mode--4:3
video output--rgb
screen mode--letter box
spdif output--on
uhf mode--pal b/g
uhf channel--40

thats all it says

[HiTeck]

Yes I have one upstairs just had a look and it is missing, it was there with the previous firmware.

Try reflashing with this > Digital Kaos - Downloads - Eurovox Max V 8% Signal Fix. See if that helps, dont forget to factory default after flashing and powerscan with the settings I listed above. Also as said can you try it at a friends house????.

[deano1981]

The cable feed is definately going into RF in on backoff box not ANT? should still find transponders and fta channels anyway.

[stecollins]

thanks for your help pal im gonna try what you suggested and hopefully let you know later that im up and running fingers crossed again thanks for your help

[HiTeck]

No problem mate, hope it works out.

[amos]

Having same problem. Loaded the 8% fw but still no tps found. Wondering is the end nigh. Anyone else having probs.

[Krypton]

. Wondering is the end nigh. Anyone else having probs.

as in another keyroll change like at the end of last year?
no mate, that would affect all boxes
signals coming in loud and clear still

[stecollins]

if you have any luck amos let me know how you did it please and il do the same for you

[stecollins]

hi hitech ive tried what you said yesterday and still no transponders or channels found, a friend of mine said something about updating keys could this be something to try ive never done it before so would need some advise