Amiko mini combo setup help please

[pfj_official]

I'm showing no signal strength no matter what I do. I take it you don't have to switch between cable and sat other than by changing one lead for the other? The sat works fine.

Sent from my GT-I9100 using Tapatalk

[loncell]

If you are not receiving any signal and you are using the correct FW + Freq/QAM the I suggest sending it back and explain. I think what has been suggested for you to do by all should have sorted your problem. Is your cable feed live ? how do you know ?

[pfj_official]

Yeah the feed works in my dm500c. I now know why it isn't working (after two nights!). Hopefully this will help someone. I had the cable feed attached to the sat connection. I just assumed that the rf connection was for a digital aerial. Sorry for wasting everyone's time and thanks for all the responses.

Sent from my GT-I9100 using Tapatalk

[loncell]

, it's normally the the most obvious that's the problem, least your sorted. Hopefully you will be up and running in no time

[rizlaskinz]

What are you're setting mate for cable, I'm also in Belfast but not picking anything up with combo, I have the sat side sorted but nothing with cable. My dm500c works fine and so does my Internet so I know I've a live connection.


All sorted, one question, are you getting the events channels?...I'm only getting that Live events channel page, doesn't show PPV

[pfj_official]

What are you're setting mate for cable, I'm also in Belfast but not picking anything up with combo, I have the sat side sorted but nothing with cable. My dm500c works fine and so does my Internet so I know I've a live connection.


All sorted, one question, are you getting the events channels?...I'm only getting that Live events channel page, doesn't show PPV

Sorry pal haven't my cable set up yet need an f connector. But the sat side is working fine on the box.

Sent from my GT-I9100 using Tapatalk

[rizlaskinz]

I'm all set-up now, i'm happy with the box for the price.

[pl1976]

Anybody got a link to the fw for this please?


Sent from my iPhone using Tapatalk

[pfj_official]

I'll send you a link tomorrow I'm not at my PC. Although your box should come preflashed with firmware?

Sent from my GT-I9100 using Tapatalk

[kingkenny1892]

hello just wondering how to get the freq/qam settings of a vm box... are they in the vm box settings or placed somewhere on the outside of the vm box??

[loncell]

in the engineers menu, if I remember rightly ,power off the TIVO then hold up/down arrows in on the box then turn power on and keep the arrows pressed in till the engineers page appears. Some say "OOoo don't go in there , it's a dark dark place !they know you've been in there" but if you just wan't channel freqs try this;-

On the remote press :-

Home > help and settings > systems info > diagnostics,

and scroll down to find the frequency for that particular channel,

Then do a single frequency scan on the amiko.

[freck]

Belfast Mini Combo Cable.rar
Try that....choose all Software and bootloader
Freck

[casuk]

have you got the Glasgow channel list for cable