Zgemma problem

[tweenage]

Right I just got a zgemma h2h put vix on it , and getting low signal rates on all Channels , nothing is clearing , and keep getting service not found , sid not found in pat , anyone got any ideas , net Id is correct and am at a loss now
Many thanks

[plasterer]

Low signal levels is OK.
29 percent mine runs OK on.
Recheck net ids
Select vm from providers and run auto bow k
Let's know results. ..... paul

[tweenage]

Have done auto scan and get 397 channels , on my Id 41050 which apparently is correct even though area name is wrong , when I do manual scan , I only get 3 channels , :-/

[plasterer]

wot area are yu in.
What net id are you useing
Are you getting Free to air channels
.............Paul

[tweenage]

Now getting a few premium channels clearing , others say something about Sid not found in pat , area code I'm using is 41050 , but picked up a genuine box and it's showing net id as 41051 , but that's no where near my house , am going to try it later when get home

[tweenage]

Would if code was wrong , only give me a few premium channels and create that error on others ?

[lincsat]

You have put the correct NetID in the ABM and not just in the tuner config? If a subscribed box works with a certain area code, then use that.

[P&D]

If you give us clue what area you are then we can give you the correct net ID

or is this a guessing game ?

Needed to pick up channels.....correct net id & correct symbol rate
we can only guess at these without help

Example Manchester...............

Manchester 1 NTL ex C&W 41040 6.887
Manchester 2 NTL ex C&W 41060 6.952

2 different net ids & 2 different symbol rates but the same place

[tweenage]

Yep problem I have , I live in Shepherd's Bush , which is 41050 , but when I use that id I only get a few channels clearing , i.e. Sky sports 5 , but ss 1-4 show as no pat In sid , and yes but the Id into Abm and tuner , it's very strange , apparently you either get premium channels or you don't , it's shouldn't decide to just give you a few , like I don't have normal channels 1-4 but have channel 5 :-/ , thinking maybe cos virmin split off the neighbours feed , i( as my cable couldn't be traced ) it's causing some kind of conflict , what do you think ? But they supposed to be coming on Wednesday to pull me a new cable to my house , maybe that will solve the problem , but not holding out much hope
Regards

[tweenage]

Sheperds Bush NTL 41050 666.750 6.887 , am I supposed to do anything with the 666.750 6.887 ??
Thanks

[P&D]

Go in to your tuner settings net id 41050

provider to scan VM UK 6887

then do a manual scan you should get the channels

I think you can also set this up in ABM as well..in the same way

[tweenage]

I don't see them numbers , I got options pure , bruteforce , no numbers visible , I scanned on pure :-/

[tweenage]

On my symbol rate , on tuning info it says symbol rate6952 -auto , maybe there lies my problem

[tweenage]

Somehow managed to switch rate , had to do manual scan and now all working , got lots of duplicates , can I run bouquets to clean it up

[P&D]

Yeah mate I think so......I don't use ABM mate