500c - Card Sharing

[gerald5445]

nice 1

[sakiblateef]

f lines and c lines ., wots that m8 and wot splitter would the cables go into ( not vm cable )

An f line is what you put in your sever for every client who want to view channels from your sever and in return you send them a c-line which they can put into the cccam cfg file in their receiver in order to login and view the channels.

[Mr_Spark]

Before we talk about doing any c/s with cable on any Linux/fta box we are going to need to suss out a few things

1) RSA string
2) Method of pairing card
3) How to alter c/s code to work with a 180

I would imagine possible; but a bit of work needed.

As for c/s not a propper hax and tbh a way for free tv so its al about ?????? and not a hobby so I hate it.

Regards

Spark

[smirnoff_rules]

An f line is what you put in your sever for every client who want to view channels from your sever and in return you send them a c-line which they can put into the cccam cfg file in their receiver in order to login and view the channels.

so just for educational reasons ... wot could u need and wot type of cost for home use ?

[sakiblateef]

so just for educational reasons ... wot could u need and wot type of cost for home use ?

1. As stated in a previous post you need a box to act as a sever.

2. A subscription

3. Broadband connection


You can easily weigh up the cost from here.

[smirnoff_rules]

for educational reasons l have 4 fta dreamboxes and all the rest . just cant see how one box serves the rest ?

[sakiblateef]

for educational reasons l have 4 fta dreamboxes and all the rest . just cant see how one box serves the rest ?

Yes it is needed mate I made a mistake there I was thinking about a different setup yes you will need it to communicate. I've edited the above post.

[smirnoff_rules]

Yes it is needed mate I made a mistake there I was thinking about a different setup yes you will need it to communicate. I've edited the above post.

so would u need to host your own server then ?

[HoTTDubbER]

dream box is just a small linux based pc

a server is a pc that can handle , manage and provide incoming and out going connections

every dreambox is already setup to be a server you just gotta configure it a little

when people talk about pc servers
it just means that instead of killing that little 250mhz cpu to handle all your connections you install linux debain and cccam on a pc to handle the connections for you and just use the reciver as a client to that server
this is where usb card readers come in. you plug usb readers into your debain , which will then supply the boxs
its very simple really

so all the box has to do then is open channels and mange 1 just 1 connection instead of many which will in turn slow your box down and make unstable

[ianmac]

1. As stated in a previous post you need a box to act as a sever.

2. A subscription

3. Broadband connection


You can easily weigh up the cost from here.

For sharing 4 boxes inside your own home like smirnoff,
I did not think you would need even the "Broadband Connection",
You would only need an old Router with each of the boxes clonnected to it & having it's own internal ip address configured on an internal network, just like you would connect pc's laptops & network printers ect.
All the boxes can then talk to each other,

once the cs config files have been adjusted so that the one box "with the card in" sends the card info to the other 3 boxes.

[HoTTDubbER]

For sharing 4 boxes inside your own home like smirnoff,
I did not think you would need even the "Broadband Connection",
You would only need an old Router with each of the boxes clonnected to it & having it's own internal ip address configured on an internal network, just like you would connect pc's laptops & network printers ect.
All the boxes can then talk to each other,

once the cs config files have been adjusted so that the one box "with the card in" sends the card info to the other 3 boxes.

thats right mate yeah if ur sharing your own viewing card internally you would just need a server a router and clients being the boxs , net is only required when sharing with external peers

[contemptx]

The Only Difference between the server & client box, is that the server is the one with the card inserted.

The rest of the configuration, apart from a few digits is the same.


CardSharing Setup:

Server:
Dreambox, Setup With Cam (CCCam/Newcamd) + Card

Client
Dreambox, Setup With Cam (CCCam/Newcamd)


It might sound complicated to setup, however it really only takes a matter of minutes.

If sharing Sky for example, you need the card & the box key, which you can easily read from the information menu on the sky reciver.

Then you need to install & setup the cam, most images will auto install the cam and another simple program with a few clicks will setup the config file.

Side Note*
The Server, does not have to be a dreambox, if you want to be more technical, you can use your pc or other hardware + card reader setup.

[smirnoff_rules]

so if l have this setup how do u send the card info to the other boxes ?

[kevindj]

i wouldnt bother using the dreambox to serve, just get a shitty pc and ulpoad ubuntu server newcs and cccam and its happy days, the latest sly cards share fine so dont doubt the new nagra will be any different, nds is a far superior encryption system to nagra.

[smirnoff_rules]

is there a server program l can use on windows ? l have a pc working 24/7 with vista linked to the network , and do l just need a usb reader then ?