Please upload Maplin USB To Serial RS232 Drivers :D

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • juslovingit
    Newbie
    • Dec 2008
    • 4

    #61
    If you have already installed a USB-to-Serial converter and the Florida Probe freezes in the calibration routine, you will need to download this replacement driver file: ser2pl.sys
    This file must be placed into the C:\Windows\System32\Drivers folder for Windows XP, ME or into the C:\WINNT\system32\drivers folder for Windows NT, 2000. Windows will ask if you want to replace an already existing file with that same name in the destination folder. It will show that the file you are replacing is smaller than the file downloaded here. Click 'yes' and restart your computer.

    Comment

    • benny/9
      V.I.P. Member
      • Nov 2008
      • 1964

      #62
      for anyone who needs this info and drivers for a usb to serial converter here are the drivers for both XP and VISTA. make sure you use the correct file for your computer O/S
      *******************************************
      usb to serial convertor
      this is a driver file for a [usb to serial convertor]
      this is to enable you to use a [ laptop without a 9 pin com port] . to use a null modem cable to programme your receiver. it says plug and play on these devices, they dont and you need a driver, so if your device came without a driver disc use this it works 100%.
      [1] open and run the driver file with the device unplugged
      [2] it might ask you to uninstall old drivers [say yes]
      [3] re-start your pc after installed.
      [4] connect your usb to serial device.
      [5] check in the device manager settings
      [ prolific usb to serial com port.-com [1].
      Last edited by benny/9; 14 February, 2009, 18:53.
      Please Read Carefully!
      No Sky UK NDS Videoguard Hacking Discussions.
      Viewing Pay TV without a valid subscription is illegal
      the files available are kept for experimental & educational purpose only
      original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

      Comment

      • norbert
        Junior Member
        • Jan 2009
        • 24

        #63
        Flashed my eurovox yesterday, using the guides the only problem was getting my laptop to use the USB serial and nul modem cable.

        As this was a cheep cable from flebay it came with no drivers, after searching for about two hours and trying six or seven I foung the one i needed. thought I would share this as the drivers i found on here did not work for me.

        The usb port has the numbers HL-340.The driver can be downloaded from-

        http://www.winchiphead.com/download/CH341/CH341SER.ZIP.

        I hope saves someone some time.

        Comment

        • RTID75
          Newbie
          • Jan 2009
          • 4

          #64
          Thanks. Had one of these for over a month but not tried to use it until tonight!

          Comment

          • Lanxman
            DK Veteran
            • Dec 2008
            • 552

            #65
            Digital Kaos - Downloads - Maplin serial conveter
            Sometimes a slow gradual approach does more good than a large gesture.

            Comment

            • blazesf
              Newbie
              • Jan 2009
              • 1

              #66
              I have the same problem, gonna try a few of these downloads and post back if i can get it working.

              Many thanks

              Comment

              • icoman
                Newbie
                • Jan 2009
                • 1

                #67
                I have the same proablem with these kind of driver rs232 but on the cable it is write HL-2303 and none of the drv. from the cd cable won't install on xp (and i am very experinced with installing driver on xp )

                Comment

                • spiderman01
                  Newbie
                  • Jan 2009
                  • 3

                  #68
                  There is a few posts with drivers. Which one for the maplin usb please?

                  Comment

                  • Lanxman
                    DK Veteran
                    • Dec 2008
                    • 552

                    #69
                    Originally posted by spiderman01
                    There is a few posts with drivers. Which one for the maplin usb please?
                    Her you go mate.
                    Digital Kaos - Downloads - Maplin serial converter
                    Sometimes a slow gradual approach does more good than a large gesture.

                    Comment

                    • SAM87
                      Newbie
                      • Jan 2009
                      • 12

                      #70
                      RS232 CABLE DRIVER!!

                      hi, evry1, well i bought a HL RS232 CABLE from internet. when i connect to my laptop its says unknow device. i tried to update the driver but it says window already installed good driver..

                      i tried so many drivers but cudnt sorted out..
                      i m using window vista 32bit

                      can anybody help me out..please

                      thanks..

                      Comment

                      • sskhaira08@yahoo.co.uk
                        Newbie
                        • Dec 2008
                        • 2

                        #71
                        Drivers for usb to rs232

                        Please install the software first and then plug the cable when asked and follow the instructions....

                        Comment

                        • sskhaira08@yahoo.co.uk
                          Newbie
                          • Dec 2008
                          • 2

                          #72
                          Driver for usb to rs232 serial HL

                          Hallo every one ,
                          Please install the software first and then plug the cable when asked.....
                          Attached Files

                          Comment

                          • wilf
                            V.I.P. Member
                            • Jan 2009
                            • 1618

                            #73
                            Hi there m8, you need to contact a moderator and get you user name changed this will make you traceable to anyone looking in.

                            Comment

                            • leetay
                              Newbie
                              • Feb 2009
                              • 2

                              #74
                              Hi all

                              Yes I need the drivers too, but you have to post first.

                              Just thought I'd take this opertunity to intyroduce myself

                              Cheers

                              Lee

                              Comment

                              • leetay
                                Newbie
                                • Feb 2009
                                • 2

                                #75
                                Originally posted by reddave
                                Here are the drivers I use.

                                Hi All

                                I am trying to get the driver you guys have posted, however, the moderators say I cannot get them, Does anyone know why, do you have to post 15 or so times first.

                                If so couls someone please PM them to me

                                Cheers

                                Lee

                                Comment

                                Working...