SP1 jumping about

[creationblue]

Hi All

Ide just like to say Great Job KV, patients was the key, been watching and reading this last few weeks.......

My Bro has had a prob with Sly Sprts 1, where the picture is unwatchable and keeps freezing, this happened before this last blip and i got him to do a factory reset and rescan just now as he wasnt getting any channels, now getting whats available but still got the same prob with SP1. Any ideas?

Thanks

Just

[gadgetfiend]

as you said patience is the key m8

[DW190]

Hi All

Ide just like to say Great Job KV, patients was the key, been watching and reading this last few weeks.......

My Bro has had a prob with Sly Sprts 1, where the picture is unwatchable and keeps freezing, this happened before this last blip and i got him to do a factory reset and rescan just now as he wasnt getting any channels, now getting whats available but still got the same prob with SP1. Any ideas?

Thanks

Just

That sounds more like a signal issue.

Check the cable feed, splitters and screw on ends if you have them.

[viddie]

Much Worker is being carried out on the servers @ the moment so little glitches like that shouldn't really be uncommon. just exercise some PATIENCE m8.

[creationblue]

Thing is he had this problem for the last 2 months, wondered if anyone else had/has problems watching SP1? Nothing to do with 'the return'

Just

[alex123]

as stated check your signal strength when on sp1 if its less than 80% quality then you have found the problem

[zee24]

nope m8, sounds like a signal issue, if your using spliters or wireless try putting the cables and ethernet in direct see if it makes a difference

[creationblue]

Thanks fellas

Im not sure how he is connected, ill check it out.

Just

[BJTT]

Yeah I Get That Same Problem As Well, Where My Signal
Strenth Fluctuates Between Either 52% To 80%. Causing Some Channels To Go Into Picture Freeze With Sound/Pause/Then Scrambled Eggs Mode/Then Back To
Normal, Any Suggestions Anyone?

[mangacloud]

try a diff scart lead

[DW190]

Yeah I Get That Same Problem As Well, Where My Signal
Strenth Fluctuates Between Either 52% To 80%. Causing Some Channels To Go Into Picture Freeze With Sound/Pause/Then Scrambled Eggs Mode/Then Back To
Normal, Any Suggestions Anyone?

Signal fluctuations are usually caused by poor connections in the cable feed. The problem I have come accross repeatedly is the use of cheap splitters and screw on ends. (one tiny strand of the outer core touching the inner core being the most common)

try a diff scart lead

Scart will have no effect on the signal flutuation.

[tezzagee]

most having same prob so not just to do with leads signal is breaking up but we have back which is more important??it will get fixed as we go along

[halfwaythere]

if none of the above is working for you, try a new modem / router as it may be losing packets just a thought as this is what happend to my parents.

[BJTT]

Thanks For The Info, DW190.
I Will Check Out Alternative Ways To Connect My Cable To The KV Box. What Sort of Corax Cable Do You Recomend?

[boodykaka]

You could also buy cable tv amp like this one
High Quality 6W CATV Cable TV Signal Booster Amplifier | eBay UK