No Network ID when scanning

[DW190]

On performing an Auto-scan it comes up with "Already Exist" 8 times and then completes without finding any channels. I never get the option of selecting any geographical location (i.e. Oxford) for the Network ID.

If you dont get the option to select geographical area, its either your not pressing the green button at the right time or the signal is corrupt.


Easy Install
Auto search
Right Arrow
Select provider from Drop Box
OK Once
Green Button
Geo areas should now appear
Scroll to correct area
OK

[Kryptonite]

If you dont get the option to select geographical area, its either your not pressing the green button at the right time or the signal is corrupt.


Easy Install
Auto search
Right Arrow
Select provider from Drop Box
OK Once
Green Button
Geo areas should now appear
Scroll to correct area
OK

Hello DW190. After pressing the Green button to start the scan I receive "Already Exist" 8 times (there are 8 TPs listed under NTL by default after a Factory reset) and then it moves on to try and find channels (which it fails to do). I never get the Geographical option.

It now appears there are 3 VM area faults - two reported today which are supposed to be resolved today and another that was reported on Friday with a resolution by tomorrow... I think this is causing my issue and I'm starting to get hacked off.

[taffydav]

if you are only gettin 8 tps then you are either scanning wrong id or wrong provider m8

[nhorrocks]

i have same prob box does not give you choice of local networks.i have another box that does and works perfect.done a box to box transfer software and channels still same one box gives choice of local area nets the other does not

[cactikid]

you can do box to box transfer of firmware and channels,when you factory reset did you scan from direct feed no splitters?

[ASEK]

i have same prob box does not give you choice of local networks.i have another box that does and works perfect.done a box to box transfer software and channels still same one box gives choice of local area nets the other does not

both same model numbers?

[lac]

i have same prob box does not give you choice of local networks.i have another box that does and works perfect.done a box to box transfer software and channels still same one box gives choice of local area nets the other does not

Why the concern of no network choice,when the receiving box has the same channels/software as the other box.,does the receiving box have any channels working.
DO both the boxes have the same software,Menu-System Info
Do any channels work on the receiving box.

[voweka]

Hello guys am having the exact same problem as from yesterday, please can any one tell me if there is a resolution to this? any help will be much appreciated

[cactikid]

maybe a local area fault,as others are working.

[voweka]

thanks for the respond cactkid..

[voweka]

Dear Kryptonite, am having the same problem you describe, was just wondering how did you managed to reslove it? any help would be much appreciated

[andy1967]

If your kv is not working DL S/W and unzip and your box will work again.

[voweka]

Hi Andy, i have tryed to do exactly that and it say already updated my problem is identical to the one Kryptonite describe....my network Id as been oxford i dont know if anyone using the oxford Id is having this problem aswell? or is there something else i can try doing? many thanks

[cactikid]

your box say it has the 2012 firmware? as others on 2011 have gone down.

[voweka]

yes my box say 26/04/2012. H/W version v3.0.0