Kryptview Stuttering and freezing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pablo317
    Newbie
    • Aug 2013
    • 4

    #1

    Kryptview Stuttering and freezing

    HI , Any hardware help would be great appreciated, I have aA780 and it freezes and is digitizes the picture ?? tried another box and it works fine , so the Signal is good. when i searched for new channels, the signal bar strength drops off completely and reappears if that helps ?

    Im handy with a soldering iron if its Crystal or Diode needing changed !!!!!!!!!!!!!!!!!!!

    thanks in advance.

    Pablo317
  • cactikid
    V.I.P. Member
    • Sep 2008
    • 12017

    #2
    what firmware is on box and have you scanned on correct net id,any outside area issues as it sounds like signal issues.

    Comment

    • Pablo317
      Newbie
      • Aug 2013
      • 4

      #3
      HI ,firstly thanks for the quick response. its in my mothers House !! , ill check and get back .

      Comment

      • cactikid
        V.I.P. Member
        • Sep 2008
        • 12017

        #4
        also check splitters as they can go faulty.

        Comment

        • Pablo317
          Newbie
          • Aug 2013
          • 4

          #5
          hi , ok then. i can swap with another box, the other box works fine without freezing , the software on this a780, sw 4.1.04 -
          h/w v3.00
          date 10. 11.12,
          the channel 32 works - but still freezes, ( however it can jump to another channel and have no signal at all , is this normal)
          Network **L
          Freq 483
          symr 6.952
          mod 256
          ch netw

          could it be hardware and the tuner , you think ? worth noting when searching for channels , the signal drops to zero every 5/7 secs or so the goes back to 70

          Comment

          • cactikid
            V.I.P. Member
            • Sep 2008
            • 12017

            #6
            firmware too old needs updating by null modem cable.
            Kryptview_A780_26052013 - Downloads - Digital Kaos

            Comment

            • Pablo317
              Newbie
              • Aug 2013
              • 4

              #7
              ill have a go at upgrading he firmware and let you know,

              Comment

              Working...