Kryptview Firmware Loading Guide / Tutorial.

[richp]

No. It was bought new on ebay. 9 pin female null modem cable. The correct 1

[cactikid]

i would suggest to re-look at that last video link to see if your doing something wrong,it does happen m8.

[ASEK]

Not used it before but 100% a null modem cable

i think its ur null modem cable, try a differnt one on the lappy or the tower system.

[rizy]

hi i am getting an error message the download is not requested... Any ideas?

[cactikid]

yes read post 268

[myownlab]

Is there any idea with Prog DVB in PC to view channels through signal received by RS-232 (Starsat Model srx-120 D)..!!!! I m trying without any tuner card... (Do u knw the magic..?!)

[myownlab]

please help...

[cactikid]

this is a kryptview thread wrong area.

[riellarose]

HELP!! When following the steps and trying to open bin. file message box says "Invalid File Handle"... What steps should i take? Also, do i need to be able to open the bin file as it has appeared on my desktop with a VLC icon!!!

[cactikid]

[ame=http://www.youtube.com/watch?v=Q2RbdhH7_b4]Flashing the KV780 - YouTube[/ame]

[yorkshire1]

newbie question A780

Having had a few Dboxes in the past, I'm no stranger to flashing firmware etc onto boxes.
I've read loads of threads about the A780 and still have one question I need answering.
My cable feed is upstairs in our main bedroom, BUT my router is downstairs in our living room, so my quetion is how would I keep a constant connection to my router via my box?
As I say I have had a few boxes in the past,including the original A700c box!
Hope someone out there can give us a definate answer.
Cheers,
yorkshire1

[cactikid]

long lan cable or maybe homeplugs if on the same ring,some people use a wireless connection.

[yorkshire1]

long lan cable or maybe homeplugs if on the same ring,some people use a wireless connection.

Is is possible to connect via a wireless connection? didnt know if that would be reliable enough. What sort of hardware would I need to buy for that? I'm very close to a Maplins so not a problem getting stuff. cheers for the advice so far.

[ph3d]

stuck

hi just went through all the motions when my box has rebooted it just says (on) on the diisplay and no signal on the tv cant access any menus or anything to try resolve? please help me

[cactikid]

simple question to answer,what firmware is on box?