A750 + IConnector 03012011 Firmware

[satsmo]

Kryptview A750 + IConnector latest firmware 03/01/2011

Digital Kaos - Downloads - Kryptview A750 03/01/11

Please be advised that if you upgrade your A750 with the 03/01/2011 firmware, make sure your IConnect is powered OFF when doing the new channel scan.

Only reconnect it and power it back up again once you have a TV signal displayed on the TV (Usually channel 0000).

Once you power up the IConnect, it should take over the A750 and download a major update from the internet. This is normal and should be allowed to proceed (display shows on both the TV and the A750). Once the A750 display shows the word SUCC it is complete and you may now use your IConnect in the manner in which it was designed.

If you get the above wrong, the IConnect will sit there and only display 2 green LED's (power and connection). If this is the case, re-read the above and you have to start from the beginning (re-flash).

[amit chauhan]

how do you open the file

[satsmo]

You don't open it , use the loader as normal to flash the A750. Guide is just below http://www.digital-kaos.co.uk/forums...utorial-42524/

[nims.topiwala]

what is new feature in this firmware

[badapple]

hoping this will help against n3 ;-)

M8 it will not open any channels which have gone to nag3 as that encryption is not hacked.
What it does is enable you to view cable tv channels through C/S.

[mainy 1888]

im now using my laptop to flash and its not having it comes up on all com ports bautrate not right or somethin like that my main computer used to flash no probs til wife fkd off with it i still use same router which is secured could that be problem

[loonyking]

keep saying dowload not requested.. what can i do please help

[EAMO 2]

keep saying dowload not requested.. what can i do please help

Turn off box, hit START on loader, turn on box

[bup-bupe]

kv a750

hi would the kv a750 work with the OpenMedia Wifi Bridge ?????? the a750 has a serial on the back not a ethatnet is there any way off connecting serial to earthnet adapter

[jumpinjo]

hi would the kv a750 work with the OpenMedia Wifi Bridge ?????? the a750 has a serial on the back not a ethatnet is there any way off connecting serial to earthnet adapter

you need i-connector with 750 to work with wifi or anything else

[Dharm]

Hey I'm new

Hi, I need some help with Kryptview A780.
Let me know if you can help

[EAMO 2]

Hi, I need some help with Kryptview A780.
Let me know if you can help

There's loads of help here You need to specify problem. First read
this tutorial

http://www.digital-kaos.co.uk/forums/f99/kryptview-firmware-loading-guide-tutorial-42524/

Use this firmware
Digital Kaos - Downloads - KV780 03/01/10 Firmware
Come back if you need help

[nokias]

Hi,

I reflashed my A750 with the latest update. While the i conn was being flashed , my son pulled the power out. Now the i conn has only 1 solid green led light showing (power) and no other movement. I have left it connected for several hours but nothing has happened.
Anyone know how to resolve this please?

[EAMO 2]

Hi,

I reflashed my A750 with the latest update. While the i conn was being flashed , my son pulled the power out. Now the i conn has only 1 solid green led light showing (power) and no other movement. I have left it connected for several hours but nothing has happened.
Anyone know how to resolve this please?

Start from beginning & reflash box, keep trying if it doesn't
respond at first (hit START on loader box off-box on)
Read first post in this thread

http://www.digital-kaos.co.uk/forums/f99/a750-iconnector-03012011-firmware-120981/

[nokias]

Start from beginning & reflash box, keep trying if it doesn't
respond at first (hit START on loader box off-box on)
Read first post in this thread
http://www.digital-kaos.co.uk/forums...rmware-120981/

Did it a number of times with different f/w. Box takes the flash , no probs there.The i connector still is not doing anything. Just the power light stays on. The other lights do not flicker or come on. Box has got freeview channels on it, seems like it's trying to communicate with the i-conn but i conn just ain't having it. Box takes the flash , no probs there.
Is there a way of flashing just the i conn?