kv750

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • guppyabby
    Top Poster +
    • Jun 2010
    • 232

    #1

    kv750

    hi,can anybody confirm if kv 750 is down or is it the sever as mine gone dead saying scrambbled or no signal,this happens alot.tried swichting on & off but no luck ,help will be appriciated.
  • janobi
    V.I.P. Member
    • Mar 2008
    • 1624

    #2
    Originally posted by guppyabby
    hi,can anybody confirm if kv 750 is down or is it the sever as mine gone dead saying scrambbled or no signal,this happens alot.tried swichting on & off but no luck ,help will be appriciated.
    Servers are fine, its your setup that is causing problems.

    Comment

    • guppyabby
      Top Poster +
      • Jun 2010
      • 232

      #3
      thanx for your quick reply, iv connected to wireless router then to iconn then in to receiver,still used to work although i had to switch on off many times to clear the signal,if this is wrong can you please advice me how it should be done tanx 4 your help.

      Comment

      • DW190

        #4
        Originally posted by guppyabby
        thanx for your quick reply, iv connected to wireless router then to iconn then in to receiver,still used to work although i had to switch on off many times to clear the signal,if this is wrong can you please advice me how it should be done tanx 4 your help.

        If its bad or no signal it sounds like your cable feed to your box. Could be a poor connected screw end or loose wire.

        Try BBC 1, if that says bad or no signal its deffo the cable feed.

        Comment

        • guppyabby
          Top Poster +
          • Jun 2010
          • 232

          #5
          him8 checked all cables ok but iv got april software could that b the problem,does it need updating.

          Comment

          • barrowmanandrew
            V.I.P. Member
            • Nov 2009
            • 3427

            #6
            go to:
            menu
            installation
            s/w update

            and the box will automatically update...

            Comment

            • guppyabby
              Top Poster +
              • Jun 2010
              • 232

              #7
              iv tried that mate but getting error message.

              Comment

              • EAMO 2
                DK Veteran
                • Nov 2008
                • 1201

                #8
                Originally posted by guppyabby
                iv tried that mate but getting error message.
                Looks like your box is not connecting to internet. Reboot router
                then reboot box. Otherwise go to network setup in menu. Select
                UK and Auto-connect.

                Comment

                • guppyabby
                  Top Poster +
                  • Jun 2010
                  • 232

                  #9
                  if im not connected to internet how comes its working most of the day,the signal strengthat the moment is top bar 56 bott.55

                  Comment

                  • guppyabby
                    Top Poster +
                    • Jun 2010
                    • 232

                    #10
                    furthe more m8 iv tried what you said set up menue= but cant get uk .auto connect in the menue bar,any idea,thanx

                    Comment

                    • EAMO 2
                      DK Veteran
                      • Nov 2008
                      • 1201

                      #11
                      Originally posted by guppyabby
                      furthe more m8 iv tried what you said set up menue= but cant get uk .auto connect in the menue bar,any idea,thanx
                      Sorry for earlier post, I may be confusing KV with SVU or Ddigital. I don't have KV to check menu, but if you reboot router, then power-up i-connect, then power-up box it should connect to internet.
                      Firstly flash box with KVa750 i-connect firmware 09/09/10.
                      Then fac-reset & scan for channels.
                      Now connect i-connector to box & router. Wait for i-conn. to load update to box. You will see SUCC in display when complete. This firmware is in STICKIES at top of page. Read Satmo's instructions. Now when you select s/w update it
                      should either update or say s/w up to date.
                      Once your internet connection is OK you should look at your
                      signal strength. It should be 70+. You may need to replace
                      faulty cables or splitters. Check sig. strength when box is
                      working & when not working.
                      Last edited by EAMO 2; 2 November, 2010, 22:16. Reason: correcting date on firmware

                      Comment

                      • guppyabby
                        Top Poster +
                        • Jun 2010
                        • 232

                        #12
                        when u said reboot the router do you meen switch on and off.

                        Comment

                        • DW190

                          #13
                          Originally posted by guppyabby
                          when u said reboot the router do you meen switch on and off.
                          To reboot you switch off first then switch on.

                          Comment

                          • cactikid
                            V.I.P. Member
                            • Sep 2008
                            • 12017

                            #14
                            if signal is around 55 do you have bb only which is capped,or do you have a min package and bb.

                            Comment

                            • guppyabby
                              Top Poster +
                              • Jun 2010
                              • 232

                              #15
                              i have min pakage,dont no what you mean by bb

                              Comment

                              Working...