SV2 no channels found..?

[ozshea]

got a box to flash from a friend it just says the box on the top left hand corner so i take it its a starview 2, got the loader and new fix from the downloads section, flashed the box it came up flashed sucessfully, i done an automatic scan for my area came up as no channels found, when i go to any channel it says scrambled or bad channel then it changes to no signal, i set the default key and turn on key emu and it still does the same.
any suggestions...??
thanks oz

[camelv]

do a factory default m8 then set default key and emu to on then rescan it.once the scan has finished leave on sly sports 1 to update.

[ozshea]

i go to factory setting put in 0000 and the box where i enter the 4 zeros is just poppin back up again, im thinking thats its the wrong password, is there a default password that i can enter,
thanks for your help.

[camelv]

i go to factory setting put in 0000 and the box where i enter the 4 zeros is just poppin back up again, im thinking thats its the wrong password, is there a default password that i can enter,
thanks for your help.

try 1004 m8

[ozshea]

i got the password from the chap who owns the box, done a factory reset turned on key emu, done another scan, it came back no channels found...
its a puzzling one......

[maca]

re scan first m8 then turn key emu on

[ozshea]

yeah tried that still coming back no channells found,
any other sugestions...????

[maca]

might sound silly have you got right provider

[ozshea]

yeah the right provider, have done plenty of SV1's,
will i reflash it and see what happens....???

[ozshea]

yeah tried all that, still the same and the box only has 1 coax input unlike the SV1 so its in the right place, just reflashed it and still the same....

[jackd]

.

my starview the box super was doing the same just kept on reseting it and doing scan its just started to work now
but i was doing it 4 2 days

[ozshea]

it just says the box in the corner im on ntl cable, dont no if the owner is on mmds, but i flashed it with SV2 fix for cable and scanned my area so id imagine it should work for me in my area now.

[ozshea]

ok was talking to another chap who does boxs in my area, if the box was mmds there would be an option to turn on a power supply through the coax out socket to power the arial and this function is not on this box so i can definitely say its a cable box.

[cactikid]

n*l mmds and cable use same box as in dvb/c only c****s mmds use t boxes as in dvb/t.
what vers is in system info for starters???
is coaxial going into cable input,and are u scanning N*l in provider.?