Starview HD Combo LAN & NON LAN STBs

[alisonms]

I have followed your instructions through every step. Waited for scrambled channels to update for more than 5mins but nothing. Any further suggestions. Please

[kslepaviciute]

Help..

Hello mate i have the Starview plus HD Lan
How do i erase the Cccam servers from the box?
I tried factory reset an their still thier...

[alex123]

Hello mate i have the Starview plus HD Lan
How do i erase the Cccam servers from the box?
I tried factory reset an their still thier...

only way seems to be rewriteing your line as all 0's with remote

[bill4676]

could any one help me with CCcam i dont no what to do i need spep by step instuction
please

[pongo snodgrass]

could any one help me with CCcam i dont no what to do i need spep by step instuction
please

just got my starview hd combo today.....got the cable side working fine, great picture...any help would be great as im new to the sat side of this box...cheers in advance.

[alex123]

Hello mate i have the Starview plus HD Lan
How do i erase the Cccam servers from the box?
I tried factory reset an their still thier...

just use red button on remote

[alex123]

hi guys...i dont think CCcam will work at the moment, as no firmware upgrade has been developed, but according to one of the sellers i was talking to....it will....soon, hence the ethernet port....well thats what he told me...

yes it is working m8 i eventually got mine working the usb method seems to screw up box so enter details via remote only
alex

[jugulator]

Firmware links for both box types updated on page one.

What does this update do..? I had used the previous firmware and everything seems to be working well (ie, receiving all scrambled Cable channels). Is there any advantage of updating this firmware..? Thanks

[richbarondick]

THIS IS FOR THE LAN, (STB WITH ETHERNET PORT), BOX ONLY THIS FILE WILL KILL A NON LAN BOX YOU HAVE BEEN WARNED AS THEY ARE NOT COMPATIBLE.

- 7Days EPG update every area.
- Update Scan/channel List menu issue.
- USB menu update.
- Video Output setting update ("HDMI + YPbPr + CVBS", "RGB SCART")
- Satellite scan update.

Firmware can be found here Digital Kaos - Downloads - Starview HD Combo LAN Firmware

Readme:

THIS IS FOR LAN 1214 BOX


DO NOT LOAD THIS FILE ON A NON LAN BOX OR IT WILL KILL YOUR BOX YOU HAVE BEEN WARNED !!!!!!

NON LAN BOX IS THE BOX THAT DOES NOT HAVE A RS232 CONNECTOR ON THE BACK OF THE UNIT THIS WAS THE FIRST BATCH OF 500 SOLD !!!!


Load grooverider file on to your usb memory stick,make sure power is off on machine and insert the memory stick into the front usb socket
underneath the front flap.


Turn the HD Combo on.

From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE..

the machine will update and restart (don't pull your memory stick out until the machine has fully started up)
you now need to scan your channels,
so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example ntl is 6887, the other numbers are 6952 for telecast and EXc&w.
When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE

Channel list..

all your channels are categorised by
pressing ok on your remote brings up the channel list but it will be in simple layout,
pressing the red button takes you to detail,
now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable
at the bottom of the list this will then give you the categories,
to change each section you simply use your left or right arrow buttons




GOOD LUCK
GrOOvErIDer


For Sat set please look at end of readme Click Here

Thanks for the info.

[richbarondick]

THIS IS FOR THE LAN, (STB WITH ETHERNET PORT), BOX ONLY THIS FILE WILL KILL A NON LAN BOX YOU HAVE BEEN WARNED AS THEY ARE NOT COMPATIBLE.

- 7Days EPG update every area.
- Update Scan/channel List menu issue.
- USB menu update.
- Video Output setting update ("HDMI + YPbPr + CVBS", "RGB SCART")
- Satellite scan update.

Firmware can be found here Digital Kaos - Downloads - Starview HD Combo LAN Firmware

Readme:

THIS IS FOR LAN 1214 BOX


DO NOT LOAD THIS FILE ON A NON LAN BOX OR IT WILL KILL YOUR BOX YOU HAVE BEEN WARNED !!!!!!

NON LAN BOX IS THE BOX THAT DOES NOT HAVE A RS232 CONNECTOR ON THE BACK OF THE UNIT THIS WAS THE FIRST BATCH OF 500 SOLD !!!!


Load grooverider file on to your usb memory stick,make sure power is off on machine and insert the memory stick into the front usb socket
underneath the front flap.


Turn the HD Combo on.

From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE..

the machine will update and restart (don't pull your memory stick out until the machine has fully started up)
you now need to scan your channels,
so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example ntl is 6887, the other numbers are 6952 for telecast and EXc&w.
When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE

Channel list..

all your channels are categorised by
pressing ok on your remote brings up the channel list but it will be in simple layout,
pressing the red button takes you to detail,
now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable
at the bottom of the list this will then give you the categories,
to change each section you simply use your left or right arrow buttons




GOOD LUCK
GrOOvErIDer


For Sat set please look at end of readme Click Here

Very Usefull, thanks

[jugulator]

Latest firmware

could anyone tell what is new in the latest firmware update..and is it worth upgrading..?

[geordi]

I am thinking of buying the starview combo hd Lan, but i was reading a previous post about the uk becoming N3 soon is it not advisable to get this box or could someone tell me wot N3 means? is it something to do with not recieving channels after a certain mount of time.

[jadee]

Latest Firmware

Hi, what is the difference between the new firmware and the old firmware for the none lan box...?

[thedon12345]

Starview hd combo

Can someone point me to images of the different starview hd combo versions,
I have rs232 version and want to see what the differences are.
thx.

[rawky123]

Bought one of these Combo Units , downloaded softwear update installed it and all is well.
Thanks Satsmo