Notts Area all channnels off at 1.30am Wed
Collapse
X
-
EMU stands for Emulator... Which decodes the channels... without the EMU the channels would not decode on these boxes
to switch on the EMU.. press menu > 1570 > Key emu > Set default key
exit 3 times
wait for code to update on a PPV channel.Comment
-
on boxes after sv3's , emu is called keycode!YNWA..Comment
-
SS 1 ONLY MISSING NOW
Hi Guys just done a reset and rescan on my SV3 box have every channel now EXCEPT SS 1 on 511 is FX 731.000 FREQ.
I have search all the none discript channels like tv3 tv 18 etc but SS 1 is nowhere to be found.
Has it moved from 731.000Khz ??
Main reason I got the box was for the Fooooty any hellllp anyone Pls
Mike in Nottm ...
Comment
-
Comment
-
no still on 731000.put it on fx thenHi Guys just done a reset and rescan on my SV3 box have every channel now EXCEPT SS 1 on 511 is FX 731.000 FREQ.
I have search all the none discript channels like tv3 tv 18 etc but SS 1 is nowhere to be found.
Has it moved from 731.000Khz ??
Main reason I got the box was for the Fooooty any hellllp anyone Pls
Mike in Nottm ...
go into menu, channel edit and see if you've got another ss1 in there,if so make sure its the one you want and then delete the fx channel.should be ok.
whoops to slow typing today
Last edited by mark36; 10 February, 2010, 18:39.Comment
-
eurovox
managed to get all channels back on eurovox max
heres how .
connected cable feed direct to eurovox box (not through splitter).
went into
menu
config
clear data
input code(mines 0000)
erase all channels
then back to installation
input code again(0000)
power scan
in normal mode set symbol rate to 6887
then cursor to right to get full scan
press ok to start scan
scan takes about 40 mins
all channels are back now
PLEASE NOTE THIS METHOD WILL REARRANGE ALL YOUR CHANNELS AND U WILL HAVE TO PUT THEM BACK IN THE ORDER YOU PREFER MANUALLY , WHICH DOES TAKE A WHILE
HOPE THIS HELPSComment
-
If you go to menu then channel edit, then look there there should be a FX on chan 511 and a SS1 on 511. Then delete the FX then save, I also had to update to 1,12.Comment
-
Starview USB Box
Had the same problem do a factory reset and rescan your box and the turn back on your EMU key on the secret menu all should be fine after that.Comment
-
Do a factory reset on your box and rescan it then turn back on your EMU in the secret menu should be all up and running.Comment

But there are still several channels missing
I just get the blank screen on them !
Comment