I have a starview grooverider combo + hd box and suddenly i only get the free channels after a reset and scan it finds over 300 channels but most are scrambled . i have software ver F4.00 LDR Ver 00.21 Hardweare ver 1.20 latest update dec 12 2009 i live in Manchester and all was working fine till a couple of days ago Please speak slowly i have little knowledge of cable boxes
Scrambled cable channels (Help)
Collapse
X
-
read slowly you mite understand have done a factory reset and done scan again?I have a starview grooverider combo + hd box and suddenly i only get the free channels after a reset and scan it finds over 300 channels but most are scrambled . i have software ver F4.00 LDR Ver 00.21 Hardweare ver 1.20 latest update dec 12 2009 i live in Manchester and all was working fine till a couple of days ago Please speak slowly i have little knowledge of cable boxesDreamBox 500HD NewEnigma2 -
hi,
i've done a reset, reset the emi to be on and done a full scan but still no channels.
can anyone help?Comment
-
check if you on the list if so its all over if not try factory reset then rescan, dont forget to reset the emu after scan. hopefully you will get a bit longer out of it yet
Areas switched over to Nagra 3
- Acton London
- Aylesbury
- Barking
- Batley
- Bexleyheath
- Bournemouth
- Chesham
- Chiltern Hills
- Chingford
- Dagenham
- Dartford
- Dewsbury
- East Ham London
- East London
- Essex 1 (NTL/Excw parts only)
- Harrogate
- Huddersfield (NTL parts only)
- Ilford
- Kirklees
- Leeds
- Mirfield
- Poole
- Rainham
- Rickmansworth
- Romford (Excw parts only)
- Seven Kings
- Shepherds Bush
- South Hertfordshire
- St Albans (Excw parts only)
- Upton Park
- Waltham Abbey
- Walthamstow
- Watford
- Wessex
- West Yorkshire (NTL parts only)
- YorkComment
-
hi Georeg. dont know what area you in, seems Gtr Manchester area using new transponder (dont ask me) but the answer is to do a factory reset, install latest firmware (1.12) do recsan then turn keycode back onComment
Comment