New Firmware Starview 3 - 8.04e

[toto67]

please can any1 help me? im only getting some channels through, ive downloaded new firmware, even when i put in the codes for the last couple of days it was only letting the same channels through, i dont mean the fta channels, its letting sports stuff through but no discory if ya all catch me.

Have you tried to re-scan the box m8? Maybe try that if you havent laready done so after updating it.....

[johnnieufpb]

Have you tried to re-scan the box m8? Maybe try that if you havent laready done so after updating it.....

yes m8 done all that, dont know if i have messed it up when they first went off couple a days ago

[johnnieufpb]

yes m8 done all that, dont know if i have messed it up when they first went off couple a days ago

ie pushing some buttons i should'nt of, like factory setting, i was in them all, kinda new to all yhis

[mikea2b]

i had the same problem...flashed the box with the new software and it was still letting through no pr*emium channels!

simply rescanned channels and now it works


every channel working exactly as it used to PERFECT FIX!

the author deserves a beer ...or two..or three

[johnnieufpb]

i had the same problem...flashed the box with the new software and it was still letting through no pr*emium channels!

simply rescanned channels and now it works


every channel working exactly as it used to PERFECT FIX!

the author deserves a beer ...or two..or three

i have done all that, im getting some sports ones through, some discovery, all the blue 1's , just not getting them all, seems to be the ones on 642250KHz

[mikea2b]

dont know why you not getting these channels :S



try flashing your box again and rescan if you havnt already tried it!

[sudo08]

please help tried new fix still nothing just says scrambled or bad signal

[mikea2b]

please help tried new fix still nothing just says scrambled or bad signal

have u rescanned ?


after i flashed it all them were still scrambled untill i done the rescan...then it worked

[sudo08]

yeh but still nothig

[mikea2b]

dont know what you can do :S

mybe wait and see if a different release of the fix may work .

[geej]

Hi, I am in the same boat! I flashed the box super when the patch first appeared and it worked fine. Then about 30min ok i changed channel from ss2 to s one and it locked up with bad channel of scrambled. The only thing is this time it does not seem to even try to update like it used too.

[harrylasmith]

Works perfect 3 x updates then rolled over, no problems THANKS

[madmanc_uk]

the box super usb

got a "the box super usb" that just says updating data any help

[jusandjan]

*** HAVE YOU FOR WHAT IT TAKES ***

1st of all if anyone can help me??? I?m a real novice at this and struggling with certain lingo used. If I can speak direct to someone it might help????

I was on this for over 2 hrs yesterday and although a few people tried no-one could help me sort out my problem.

I thought it was connect download and update, most users had no problem, and so why have I?

I have a SV3 not clonned

I have downloaded the latest firmware GTRom_Super_8.02e (saved my desktop)

I then connected by box with the serial cable to my other cable to use via the PC?s USB.

I double clicked on the GTRom_Super_8.02e, choose the com port and click download.

I get flash failed every time?????

I read that said I should make sure App file only is selected, then click bin file & browse to the firmware where you downloaded it to on your PC.
But how you have App File selected only and click on bin file then is shaded. I only have the channel data file, so I clicked on that whiched allowed me to then click on the bin file; I broswes to where I have saved GTRom_Super_8.02e but it found nothing, I really don?t understand

If anyone can maybe talk me through it piece by piece and get my box working I would appreciate it very much. As I said If needed I can phone someone and they talk me through it but I'm really sure I'm doing what the forums tell me to do, but still no joy

Thank you for your time

[oscarjohnboy]

1st of all if anyone can help me??? I?m a real novice at this and struggling with certain lingo used. If I can speak direct to someone it might help????

I was on this for over 2 hrs yesterday and although a few people tried no-one could help me sort out my problem.

I thought it was connect download and update, most users had no problem, and so why have I?

I have a SV3 not clonned

I have downloaded the latest firmware GTRom_Super_8.02e (saved my desktop)

I then connected by box with the serial cable to my other cable to use via the PC?s USB.

I double clicked on the GTRom_Super_8.02e, choose the com port and click download.

I get flash failed every time?????

I read that said I should make sure App file only is selected, then click bin file & browse to the firmware where you downloaded it to on your PC.
But how you have App File selected only and click on bin file then is shaded. I only have the channel data file, so I clicked on that whiched allowed me to then click on the bin file; I broswes to where I have saved GTRom_Super_8.02e but it found nothing, I really don?t understand

If anyone can maybe talk me through it piece by piece and get my box working I would appreciate it very much. As I said If needed I can phone someone and they talk me through it but I'm really sure I'm doing what the forums tell me to do, but still no joy

Thank you for your time

m8 sounds like u have the wrong lead mines worked first time