Wii 4.3E/U softmod - Using Indiana Jones - Original Adventures

[rudidudi]

even easier wth letterbomb, no need for disk

[Kalsta]

4.3e Unable to install Priiloader

Hi there,

Just bought my first Wii on Friday, replaced the disc drive and installed the WODE Jukebox then use the Indiana Hack to install Homebrew. I am currently unable to install Priiloader (I get a cIOS036 cIOS036 isn't ES_Identify patched error -1017 when I try), so I am hoping that by following this tutorial I can fix the issue.

My sysCheck results are as follows:

sysCheck v2.1.0b12 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)

Homebrew Channel 1.0.8 running on IOS58
Hollywood v0x21
Console ID: 146369387 Boot2 v4
Found 85 titles.
Found 46 IOS on this console. 17 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249 (rev 65280): Stub
IOS250 (rev 65280): Stub
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2011/08/27.

Thanks in advance,


Kal

Worked a treat, thank you I now have Priiloader installed (upgraded to v0.7 of course). Only thing I need to figure out now is how to restore my Bootmii?

Cheers,

Kal

[Keithuk]

Only thing I need to figure out now is how to restore my Bootmii?

You generally only restore the NAND from BootMii if you have bricked your Wii do you have a problem?

To operate PriiLoader you just press the Reset button and that will show a menu with BootMii select that. You then click the Power, Power, Power, Reset on the next screen Reset again to save your NAND to the SD card or Power then Reset to restore your NAND.

Now saving your NAND is the first job you do after installing Homebrew and BootMii in the IOS. You should have selected Prepare SD card that will put the [BootMii] folder on the SD card. If BootMii can't see this folder it won't work.

[Kalsta]

You generally only restore the NAND from BootMii if you have bricked your Wii do you have a problem?

To operate PriiLoader you just press the Reset button and that will show a menu with BootMii select that. You then click the Power, Power, Power, Reset on the next screen Reset again to save your NAND to the SD card or Power then Reset to restore your NAND.

Now saving your NAND is the first job you do after installing Homebrew and BootMii in the IOS. You should have selected Prepare SD card that will put the [BootMii] folder on the SD card. If BootMii can't see this folder it won't work.

Hi Keith,

Thanks for the prompt response!

My original problem was that the initial tutorial I used (WWW.WODEJUKEBOX.ORG • View topic - WodeFlow 4.3 Video install guide), didn't mention anything about BootMii, so although it was installed as an IOS I hadn't setup the SD.

The only problem I had after using this tutorial was that if I selected BootMii I got MMM instead, I fixed that by copying a backup of my BootMii folder to my SD and am now I'm all sorted.

Thank you so much, great tutorial and much appreciated followup comments!

Regards,

Kal

[shyster]

4.3e help

does anybody know if this works on a wii,that has updated online from a 4.1 soft mod

[stephenmartin67]

do i fully format the sd card, i.e uncheck the quick format button?
thanks

[Keithuk]

Welcome to the forum.

do i fully format the sd card, i.e uncheck the quick format button?

Not really a quick format will do or just delete all files and folders?

[oogie619]

smash bros

hi does this work with super smash bor's

[zeroonetwo]

stuck at backing up NANDS

All worked fine and the homebrew channel is installed but now I am at the backing up NANDS thing and when I click launch boomii the screen disappear and I do not understand what to do with the following instruction

"Using your Wii Console to the control the selection, you need select the 4th icon across (settings, picture of two cogs) To move across to this press, POWER, POWER, POWER & then hit RESET."

could you please help?
Thanks
WII 4.3E

[Keithuk]

Welcome to the forum.

All worked fine and the homebrew channel is installed but now I am at the backing up NANDS thing and when I click launch boomii the screen disappear and I do not understand what to do with the following instruction.

As you installed HBC you had 3 options

1. Install Homebrew
2. Install BootMii in IOS
3. Prepare SD card which puts the [bootmii] folder with a few files on the SD card else when you choose BootMii from Homebrew it will do nothing.

"Using your Wii Console to the control the selection, you need select the 4th icon across (settings, picture of two cogs) To move across to this press, POWER, POWER, POWER & then hit RESET."

You have the instructions how to navigate the BootMii icons.

POWER, POWER, POWER & then hit RESET then on the next screen press RESET again to backup your NAND to the SD card.

After its backed up to the SD card remove the SD card from the Wii and put it in your computer and copy the [bootmii] folder and keys.bin and nand.bin of the cards root into a safe folder as if these get deleted of the SD card for some reason you are stuffed for restorng it back into the Wii. Backup your NAND before you install anything else?

Now that you have installed Homebrew the next job is to install PriiLoader 0.7 as this will block any updates that Nintendo send out along with any updates of discs you may use. You can do a few more tweaks with PriiLoader as well.

The next job will be to install USB Loaders there are 5 to choose from I think, there are examples on here so you can play downloaded games of an external HDD.

[zeroonetwo]

Keith

Thanks a lot for a quick response. However, the problem is not resolved. I prepared sd card but When for backing up NANDS I click on "launch bootmii" after pressing home from the homebrew channel, the screen disappears (turns blank) and it doesn't show "4th icon across (settings, picture of two cogs)"

With blank screen I pressed power,power,power from wii console and then reset which restarts the console and take me to the main wii screen and doesn't show green icon to back up sd card.

I have checked sd card on my laptop and it has bootmii folder with 3 files in it so can't understand what is wrong here.

Any help will be highly appreciated.

Welcome to the forum.


As you installed HBC you had 3 options

1. Install Homebrew
2. Install BootMii in IOS
3. Prepare SD card which puts the [bootmii] folder with a few files on the SD card else when you choose BootMii from Homebrew it will do nothing.



You have the instructions how to navigate the BootMii icons.

POWER, POWER, POWER & then hit RESET then on the next screen press RESET again to backup your NAND to the SD card.

After its backed up to the SD card remove the SD card from the Wii and put it in your computer and copy the [bootmii] folder and keys.bin and nand.bin of the cards root into a safe folder as if these get deleted of the SD card for some reason you are stuffed for restorng it back into the Wii. Backup your NAND before you install anything else?

Now that you have installed Homebrew the next job is to install PriiLoader 0.7 as this will block any updates that Nintendo send out along with any updates of discs you may use. You can do a few more tweaks with PriiLoader as well.

The next job will be to install USB Loaders there are 5 to choose from I think, there are examples on here so you can play downloaded games of an external HDD.

[Keithuk]

Well that is strange as it appears you have followed the correct procedure and sequence. There should be armboot.bin, bootmii.ini and ppcboot.elf in the [bootmii] folder.

[Keithuk]

Now I've just had a read on another forum Hackmii Installer - FIX

This guide should fix:
Hackmii- No Vulnerable Ios Found- suck it
Hackmii- Black Screen
Hackmii- Scam Screen Freeze

You will probably have to join this forum before you can download anything or read Spoilers.

[ck-ok]

All worked fine and the homebrew channel is installed but now I am at the backing up NANDS thing and when I click launch boomii the screen disappear and I do not understand what to do with the following instruction

"Using your Wii Console to the control the selection, you need select the 4th icon across (settings, picture of two cogs) To move across to this press, POWER, POWER, POWER & then hit RESET."

could you please help?
Thanks
WII 4.3E

what size and type of sd card are you using?

[zeroonetwo]

what size and type of sd card are you using?

I am using Kingston 2GB SD Card. I will try the forum Keith mentione din his earlier post this evening when I go back home and report if it resolves the issue.
Thanks