hey peeps, need help pls...

[saj1985]

for a start im using win 7 x64,
i've got phat xbox 360,
with liteon 83850c,
i've got the original dummy.bin (key)

i switch on the xbox 360,
eject drive, switch off the xbox360,
put the drive half way, making sure im holding it and switch the xbox360 back on, so the xbox 360 light flashes!
when i open jungleflasher,
i manage to detect the drive on my via 6421 in jungleflasher,
but it says in jungleflasher under dvd key - not found.
its doesnt seem to go into vendor mode,

can someone help please?
its doing my head in!

[cunny]

Prep your firmware with your dummy.bin

If your set an 100% sure its right dummy.bin the lick liteon erase. You will get a pop up. Read it. If you click yes you will get another telling you to power cycle drive. Click yes. Power off drive then back on. If all goes well you will see your drive in vendor mode. Click write then when finished an verified click outro.

A little warning is to remove the laser ribbon before flashing liteons. But upto you.

[saj1985]

Prep your firmware with your dummy.bin

If your set an 100% sure its right dummy.bin the lick liteon erase. You will get a pop up. Read it. If you click yes you will get another telling you to power cycle drive. Click yes. Power off drive then back on. If all goes well you will see your drive in vendor mode. Click write then when finished an verified click outro.

A little warning is to remove the laser ribbon before flashing liteons. But upto you.

its 100% the dummy.bin, if i try this,
and it doesnt work it wont mess it up will it?

sorry to sound thick but what you mean prep your firmware with dummy.bin?

[cunny]

Load dummy.bin into source. Load custom fw into target. Ensure it matches revision, if you on a latest dash then your drive will be 0251.

If this fails you just need to resend vendor intro to same port whilst power cycling the drive.

Are your via drivers removed

[saj1985]

Load dummy.bin into source. Load custom fw into target. Ensure it matches revision, if you on a latest dash then your drive will be 0251.

If this fails you just need to resend vendor intro to same port whilst power cycling the drive.

Are your via drivers removed

when i put dummy.bin in source, i click yes to auto load,
but then it says cant open file,
i click ok on the error message.
i put lt+2.0 in open target firmware,
i click on spoof source to target
and i get the following message at the bottom of jf -

Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied

btw yes i removed via drivers drivers mate.

is it still ok to click on lite on erase? bit confused

[cunny]

What's drive showin as in properties

[saj1985]

What's drive showin as in properties

sorry, where can i find properties?

[cunny]

Mtk flash tab. Will show as revision 8 series or 0251

[saj1985]

Mtk flash tab. Will show as revision 8 series or 0251

ok mate found it,
under drive properties it says the following

vendor: PLDS
name: DG-16d2s
F/W Rev: 8385

[cunny]

ok mate found it,
under drive properties it says the following

vendor: PLDS
name: DG-16d2s
F/W Rev: 8385

In order to flash to LT2.0 you should update your dashboard to latest, your drive will become a 0251 then

[saj1985]

In order to flash to LT2.0 you should update your dashboard to latest, your drive will become a 0251 then

so do i need to flash to stock,
update dash then put lt 2.0 on?

whats the latest version of dashboard?

[cunny]

1 came out today. Yes return to stock, download latest dash, update, flash to 2.0 al;l good, your AP2.5 will be upto date and verifiable from ABGX and you will have XDG3 suport

[saj1985]

1 came out today. Yes return to stock, download latest dash, update, flash to 2.0 al;l good, your AP2.5 will be upto date and verifiable from ABGX and you will have XDG3 suport

so at the moment i got dashboard 2.0.13599.0,
where do i download the latest dashboard from?

[cunny]

so at the moment i got dashboard 2.0.13599.0,
where do i download the latest dashboard from?

You got that dashboard installed?

And your drive not showing as a 0251?

Have you flashed the drive since taking the xdg3 update?

2.0.13146.0 flashes phat liteons to 0251 so if your on 2.0.13599.0 you should have 0251

[saj1985]

You got that dashboard installed?

And your drive not showing as a 0251?

Have you flashed the drive since taking the xdg3 update?

2.0.13146.0 flashes phat liteons to 0251 so if your on 2.0.13599.0 you should have 0251

i've flashed to stock twice, tried to update dash with usb
but keep getting this error: 351f-3524-1380-0702-c000-0099