power cable for flashing 360 dvd drive..??

[roryson]

im after a power cable for running a 360 dvd drive. i have the VIA pci card and told i need this > Xecuter CK3 Pro (Rev D) *NEW VERSION* - modtraders.co.uk
its a xecuter ck3pro rev-d
are there any cheaper ways of powering a dvd drive for ripping my own games, and perhaps flashing too.. thankx in advance..??

[smirnoff_rules]

u use one of the spare power supply inside your pc case

[roryson]

and that along with the pci VIA sata card will run my external 360 dvd drive so i can backup my 360 games... i would need an adapter from my molex power to the dvd drives power. do u know where i could find one m8..??

[smirnoff_rules]

and that along with the pci VIA sata card will run my external 360 dvd drive so i can backup my 360 games... i would need an adapter from my molex power to the dvd drives power. do u know where i could find one m8..??

ebay or just use the one u have in the box

[cunny]

You can either use the xbox itself to power the drive.

The CK3 kit is best and easiest way to power a drive. The CK3 connects directly to the molex off the PSU from PC. You would need the CK3 to connect any probes you may need in the future

[roryson]

ok m8, cheers....

[roryson]

i just thought it was a bit pricey and could find a cheaper way..

[cunny]

For the ease it adds to flashing drives, its a good buy

[roryson]

guess ill need to get one then.. cheers for your help, would i need as probe aswell?

[roryson]

if i get the ck3pro would i get the cable that runs from the CK3 to the DVD drive or would i need to get one extra..??

[cunny]

Probe V1 for Liteon 7 Series drives
Probe V2 for MRA Hack and has function of the Probe V1 also.

If your just looking for powering the drives, and dont have a liteon drive, you wont need 1.

Also the probes can be used to retrieve keys from Drives flashed with the UART patch

You should also get the power lead from drive to CK3 with the CK3.

[roryson]

cool, cheers for your help, guess ill need to flash a BENQ drive with new firmware when its out, thats about how far i would go..

[cunny]

You can flash a BenQ without the CK3 and just using the XBOX to power the drive. It gets a little tricky if you need to power cycle the drive, this is where a CK3 comes in nice and handy

The chioce is yours tho, either way you choose, myself and other users are here to offer support if you get stuck

[roryson]

i dont mind spending money if its worh it

[smirnoff_rules]

u will save it with your first game