If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi! Just read your post and feel like I should have read it earlier. I have an Epson sx 125 but its giving me problems with clogging and ink pad error. Please help me! I'm in Kenya.
It took me ages to source a SX125 waste counter reset program that works, so I thought I would pop it on here.
I've uploaded it into the download section, but thought I may as well pop it on here with a bit of guide too.
I've only tested it on XP 32bit, with a UK SX125 printer, so that's what the instructions will be tailored for. By all means try it on other OS's and feel free to post results.
Reset instructions for SX125:
Install printer if not already installed.
Download and extract attached file into a folder on your hard drive.
Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
It should come up with a message abut restarting your printer, do it!
Job done, carry on printing!
I recommend getting a waste ink tank for your printer, have a Google for one, the waste ink pipe is easily accessible from a clip in hatch on the back of the printer.
Use google translate etc and we help you, write in Spanish we're too lazy to translate
Lo que usted necesita est? aqu? en la secci?n de problemas de PC
Use el traductor de google, etc y le ayuda, escribir en espa?ol que es demasiado perezoso para traducir
1st UN-Official Meat-Head Fan Club Member (banned )
Hi eagleflh! Great post. I had to fill toners on my own since the service guy who did it earlier disappeared. I would not have done it without your help.
Many thanks.
Comment