help please EPSON R285 CIS SYSTEM

[smirnoff_rules]

thanks for your help m8 give it a go tomoz cheers.

remember to clean nozzles a few times to draw the ink in

[richardbbbb]

thanks for your help on this but just realised whats wrong the stoppers on top of the cartridges have got a little hole in them i was told to suck ink up through them i used the long needle insted of taking them out and using the syringe and its let the air in easy done if you are doing for the first time

[smirnoff_rules]

thanks for your help on this but just realised whats wrong the stoppers on top of the cartridges have got a little hole in them i was told to suck ink up through them i used the long needle insted of taking them out and using the syringe and its let the air in easy done if you are doing for the first time

wot do u mean u just realized ? thats wot l say in my posts ?

[azizmd]

i have epson r285 printer with ciss and v5 small chip not fitted on cartd pls help how to set the chip

[orb1998]

i have issues with my CIS it printer ok then runs out of ink and it take ages to get the ink running though again

any adivce?????

[bobd]

Thank you, had same prob

[diegus83]

I have a similar problem with my Epson 1410 and CISS.
The out of ink light is on and after pressing the reset button on the ciss for 20 second for every color the light wont go off.

[Seldomsober]

Smirnoff-Rules

How do i view the thumbnail images that you have uploaded, as i have a problem with my cartridges not automatically refilling and was wondering where the breather caps are located that need to be removed?

Thanks for any help

Seldomsober

[manxspud]

Smirnoff-Rules

How do i view the thumbnail images that you have uploaded, as i have a problem with my cartridges not automatically refilling and was wondering where the breather caps are located that need to be removed?

Thanks for any help

Seldomsober

The file is not there any more, due to a prob with the forum last year. You would be best starting a new thread asking for help, as this tread is over a year old now.

@manx