22" flat screen tv

[funkyuk]

hello can any help me please i got 22" flat screen tv it can be use as a monitor but when i put my pc on it all i see is the bios screen and win logo then the screen just go black ?? any 1 hel me out plz ??

[dasteph]

hello can any help me please i got 22" flat screen tv it can be use as a monitor but when i put my pc on it all i see is the bios screen and win logo then the screen just go black ?? any 1 hel me out plz ??

its possible that your tv is out of range and you need to ajust the output resolution from your pc to some where near the resolution of your tv.

[Canker_Canison]

The thick ~~~~ that I have for a brother had the same problem with his laptop. If he plugged it into a monitor it worked, but he got the blank screen on his TV.

After I lowered the resolution down to 800x600 it worked fine.

[funkyuk]

its possible that your tv is out of range and you need to ajust the output resolution from your pc to some where near the resolution of your tv.

thanks it say out of range i put it down to 800x600 and still the same

[funkyuk]

The thick ~~~~ that I have for a brother had the same problem with his laptop. If he plugged it into a monitor it worked, but he got the blank screen on his TV.

After I lowered the resolution down to 800x600 it worked fine.

thank you but i tryed 800x600 still same c bios n win logo then blank

[jake-pickering]

Hi funkyuk, have had a similar problem on a clients computer that i fixed, i fixed it using my monitor and when i gave it back all the calibration was wrong.

Luckily its a simple enough fix, follow this step by step.

1) Turn your computer off fully.

2) Wire it into the tv.

3) Turn the computer on and is it starts booting repeatedly tap f8.

4) Eventually you will reach the Windows Advanced Options Menu

5) Select Enable VGA mode and hit enter.

6) Windows will now boot in 640 x 480 res with a current video driver instead of VGA.sys

7)Once windows has booted fully feel free to re adjust your monitor with a sharper resolution etc.

Jake

[funkyuk]

Hi funkyuk, have had a similar problem on a clients computer that i fixed, i fixed it using my monitor and when i gave it back all the calibration was wrong.

Luckily its a simple enough fix, follow this step by step.

1) Turn your computer off fully.

2) Wire it into the tv.

3) Turn the computer on and is it starts booting repeatedly tap f8.

4) Eventually you will reach the Windows Advanced Options Menu

5) Select Enable VGA mode and hit enter.

6) Windows will now boot in 640 x 480 res with a current video driver instead of VGA.sys

7)Once windows has booted fully feel free to re adjust your monitor with a sharper resolution etc.

Jake

hi jake
thanks for trying to help m8 i tryed this but f8 gives me boot device hit enter reboots still same

[Sirus]

Out of range means the TV/Monitor doesn't support the Resolution you're trying to get....

If it's a HD ready TV then it should work on 1024X768 or 1336X768

Set the res in Windows first using your pc monitor, then shut down and try it connected to the TV

[dasteph]

increase the resolution gradually from the lowest setting up to the highest at some point it will become compatible with your tv.

[sdchilderley]

The pc only detects the TV on "STARTUP" you need to use another monitor when the computer starts up and enable second monitor "Your TV"

[funkyuk]

thank you all for the help tryed every thing still no go and tv is not hd thinking may b the tv is f---ed

[amos1955]

i had same problem.solved by uninstalling graphics card software then installing new drivers.took a few times but eventually worked.all working great now

[funkyuk]

ok thanks ill try it cheers

[Salami]

thank you all for the help tryed every thing still no go and tv is not hd thinking may b the tv is f---ed

Just keep "Fn" key down and on the function keys on the top click on the button that shows a small monitor, the same as using Screen projector. See if this would help.

[itckamal]

try to change the advance setting on computer to 60Hz and use 800X600
in some case there is also a setting for TVmode pal/ntsc.... pls check on computer and TV