Problem with cas 3 interface.

[wooper]

Hello.

I knew this was never going to be easy.

I have loaded the cas studio 8.6b to computer.

It's saying connect the device in your usb port.

I have a usb to serial cable, which works as have flashed Kryptview box, then a NULL modem cable connected to this, then a gender changer to connect to interface.

But nothing. Do I need a different cable to Null modem one??

Help!!!

[benny/9]

Hello.

I knew this was never going to be easy.

I have loaded the cas studio 8.6b to computer.

It's saying connect the device in your usb port.

I have a usb to serial cable, which works as have flashed Kryptview box, then a NULL modem cable connected to this, then a gender changer to connect to interface.

But nothing. Do I need a different cable to Null modem one??

Help!!!

************************************************** ***
hi wooper
for the cas 3 you use a usb cable the same as you use for your printer
you dont use the 9 pin port on the programmer for the diablo cam

[wooper]

Thanks again for your promt reply benny.

dont have a printer at home. Would you be good enough to give the exact spec cable so I can buy one.

thanks

[wooper]

Benny, you ARE the man.

A thousand thanks.

Mrs heard me grumbling. Turns out we have an old printer in the garage. Cable works a treat.
I was sat here for last 2 hours moaning.

Next need to load 1.49.

so will no doubt be on in a bit moaning!!!!!

[benny/9]

Thanks again for your promt reply benny.

dont have a printer at home. Would you be good enough to give the exact spec cable so I can buy one.

thanks

************************************************** ****
hi wooper,
i get all my cables from a guy at rainford
i will pm you mate or if you have a maplin near you
you can get them there but not as cheap.

USB 2.0 Hi-Speed A to B Cable Lead For Printers

[benny/9]

Benny, you ARE the man.

A thousand thanks.

Mrs heard me grumbling. Turns out we have an old printer in the garage. Cable works a treat.
I was sat here for last 2 hours moaning.

Next need to load 1.49.

so will no doubt be on in a bit moaning!!!!!

***********************************************
hi wooper,
did'nt you say it was aready loaded with the 1.49 file when you got it?
if it was all you need to load is the latest data file i posted.

[wooper]

no, it was 148.

all scrambled.

have just loaded 149.

do i have to load your new data bin too????

[benny/9]

no, it was 148.

all scrambled.

have just loaded 149.

do i have to load your new data bin too????

************************************************** *
hi wooper,
yes mate load the data file. the keys changed
i have posted how to load it this loads very fast for you

[wooper]

Benny,

i have your data bin on the bottom left, green arrow pointing left and yellow pointing right.when highligthed it says read file error or write file error on yellow arrow

[benny/9]

Benny,

i have your data bin on the bottom left, green arrow pointing left and yellow pointing right.when highligthed it says read file error or write file error on yellow arrow

************************************************** ***
have you got the data bib out of the folder before for loading
when you click connect at the top of the loader and wait
then the cam will connect and both arrows should be green

[wooper]

Thanks again Benny.

could not have done it without you.

Funny thing is, its all done in minutes, but then you dont know what you dont know!!!!

Turned on TV just before going to work this morning and all film and footy is back on.

Was dreaming about bloomin cables and null modems!

Next time should have it done in 2 minutes, not 3 hours!!!!

[benny/9]

Thanks again Benny.

could not have done it without you.

Funny thing is, its all done in minutes, but then you dont know what you dont know!!!!

Turned on TV just before going to work this morning and all film and footy is back on.

Was dreaming about bloomin cables and null modems!

Next time should have it done in 2 minutes, not 3 hours!!!!

************************************************** *****
it gets easier mate the more you load the cam, then everything
will take you minutes, and when your dish is sorted you will realy
get a lot to watch

[.: JaCkPoT :.]

But things can disappear very quickly....