LNB holder for 2 LNBs astra1 and hotbird

[anis_ber]

I'm looking desperately for a holder to get astra1 19.2 and hotbird 13, I prefer one that is adjustable
I found one but it's out of stock in every website that I found (even tho they say in stock), here it is
Hard Plastic Clip holder Frame for Two LNB Receivers Black Free Shipping Free Delivery
I don't want monoblock because my setup is to get 4 sats and diseqc 4x1, unless if there is monoblock without built-in switch which I doubt it does exist

thx for helping

[ramjet]

plenty on fleabay m8

[dick b]

"octagon"make an adjustable monoblock without diseqc switching it is adjustable between 4-15 degrees.
but if it is your intention to fit 4 LNBs in the future get a multibracket that will take 4 from the start,I use gibertini one for 4 sats but there is no rise or fall adjustment and a bit of "fitting" was required for one sat the rest of them I got away with leaving on the main rail.

[shankill2012]

lnb holder

I have read on another forum that you can use a monobloc connected to a splitter (Konig FC-2SPLT-ST-KN splitter/combiner with DC pass through ) with 2 seperate feeds into the Diseqc switch - and it apparently works, i just bought a universal 4 lnb bracket for ?12.50 on fleabay and as the guy said there are plenty of them.

[anis_ber]

any example of bracket on ebay?

[lagerland]

any example of bracket on ebay?

eBay: 4 way lnb holder

[blueflash234]

have a look at this setup m8

http://www.satellitesuperstore.com/multisat.htm#completemulticonnect4sat

[dick b]

if you really want a fully adjustable bracket try this german company click on multifeed halter on the left and what you want is at the bottom of the page. I believe they will ship to the uk.I"v not seen them in the uk as good as this.but I would have thought they would have been available somewhere www.sw-sat.de/Multifeedhalter-LNB-Adapter/Multifeedhalter-4-fach-verstellbar-Aluminium.html

[digicon]

if you really want a fully adjustable bracket try this german company click on multifeed halter on the left and what you want is at the bottom of the page. I believe they will ship to the uk.I"v not seen them in the uk as good as this.but I would have thought they would have been available somewhere www.sw-sat.de/Multifeedhalter-LNB-Adapter/Multifeedhalter-4-fach-verstellbar-Aluminium.html

Some of those brackets are available on ebay HERE not all of them but a few are.

[anis_ber]

Thx for help
grabbed this one
COASTEC Multiblock Universal LNB-Halter MFU3 | COASTEC GmbH

although not sure what is the difference with this one COASTEC Multiblock LNB-Halter MFTS3 | COASTEC GmbH

[gracieboo]

Some of those brackets are available on ebay HERE not all of them but a few are.

Hi there guys would any of these work on a sky dish with a little modification. My dad has a zone 2 sky dish pointing at 28.2 and id like to be able to set it up so he could get 39 and 19 east as well and give him my old technomate 5300 so he could watch some football on nova/diema. Ive seen the the foreigners houses (sorry if thats not politicaly correct) and they all seem just to use whatever dish is left on the property usally a sky dish and have two and three lnbs pointing at different sats. So i know its possible im just looking to keep it tidy any suggestions?

[shankill2012]

Found this on the net - this first picture is a set up in essex, im putting multi lnb up at the minute but im taking my sky dish down and putting an 80cm dish up for it.

[digicon]

Hi there guys would any of these work on a sky dish with a little modification. My dad has a zone 2 sky dish pointing at 28.2 and id like to be able to set it up so he could get 39 and 19 east as well and give him my old technomate 5300 so he could watch some football on nova/diema. Ive seen the the foreigners houses (sorry if thats not politicaly correct) and they all seem just to use whatever dish is left on the property usally a sky dish and have two and three lnbs pointing at different sats. So i know its possible im just looking to keep it tidy any suggestions?

The zone 2 is perfect for multi lnb setup due to its unique oval shape which allows a larger spread than a conventional dish, Due to the end stop though you pretty limited to what you could use but this ONE is ideal as you can attach it to the standard sky LNB and attach 2 others for the other sats. Just to be warned though from 19.2? to 39? is nearly a 20? spread and could be a little bit on the tight side but should be possible.

You can always try

[bj1]

The zone 2 is perfect for multi lnb setup due to its unique oval shape which allows a larger spread than a conventional dish, Due to the end stop though you pretty limited to what you could use but this ONE is ideal as you can attach it to the standard sky LNB and attach 2 others for the other sats. Just to be warned though from 19.2? to 39? is nearly a 20? spread and could be a little bit on the tight side but should be possible.

You can always try

i used this lnb holder on my brothers zone 2 dish for 13, 19.2, 28e and it works a treat i dont know about 39e though but i can not see why not, as long as you get the skew right as 39e is low in the arc....BJ1

[dick b]

Thx for help
grabbed this one
COASTEC Multiblock Universal LNB-Halter MFU3 | COASTEC GmbH

although not sure what is the difference with this one COASTEC Multiblock LNB-Halter MFTS3 | COASTEC GmbH

they have different fixings to the LNB arm.unless you get one specific to your dish it will need modding anyway,why didnt you go for a 4way as you may find it difficult to get a spare holder to fit the rail later on?