LNB issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • waterside
    Newbie
    • Feb 2012
    • 5

    #1

    LNB issue

    I bought 2 TM-1 Technomate 0.1db LNB's and find they lock causing channels to disappear, can't remember if it's the Vertical or Horizontal. I have tried one on an 80cm dish aligned to 13E Cyfra+, and i keep have to switch the box off/on to get it working with all channels reappearing again. I tried the other Technomate LNB on a Humax Freesat out of curiosity and happens with that system too. Checked the WF100 cable and as it's a short run, changed both cables. But it still happening. The strange thing is on a Horizon meter it says cable and LNB are working ok! Any ideas? What could i be doing wrong? Technomate said they have no idea what's wrong but sort of said in a roundabout way it's not their LNB's but i have a short somewhere on both systems, or doing something wrong! I'd love to find out what i'm doing wrong to cure this.
  • davvo
    DK Veteran
    • Apr 2009
    • 666

    #2
    on all f-plugs

    check the outer shielding of the coax is NOT touching the inner core of the coax
    Last edited by davvo; 29 February, 2012, 21:29.

    Comment

    • waterside
      Newbie
      • Feb 2012
      • 5

      #3
      Yes i checked that with the F connectors, but it still happens after going up and down the channels with the remote, or after a few hours on the one channel. Is there any setting different to be using on a universal LNB? This is a mystery! Even the Meter is saying no fault, Cable and LNB pass.
      I was thinking it might be the switching to the HI and Lo on the Universal LNB but there again, i don't know!
      To keep switching off and on at the mains plug is something i shouldn't have to be doing all the time.

      Comment

      • ramjet
        DK Veteran
        • Nov 2008
        • 2995

        #4
        try a different make of lnb , even a sly single or quad will do for testing

        Comment

        • waterside
          Newbie
          • Feb 2012
          • 5

          #5
          The Freesat Humax box which i tried the second Technomate TM-1 on which also locks, works ok with a sky quad lnb. It's just i can't get the Technomate LNB's to work properly without locking and have to go through the switching off/on all the time at the mains.
          On the 80cm Triax Hotbird 13E Cyfra+, There's a brilliant signal on Hotbird with the TM-1 considering so far west i'm located. It's 89 and 90%. Pity it keeps locking or freezing.

          Comment

          • ramjet
            DK Veteran
            • Nov 2008
            • 2995

            #6
            in that case take it up with the supplier

            Comment

            • davvo
              DK Veteran
              • Apr 2009
              • 666

              #7
              cordless phone ?

              Comment

              • waterside
                Newbie
                • Feb 2012
                • 5

                #8
                Originally posted by ramjet
                in that case take it up with the supplier
                ramjet I did return one for testing and they sent it back with a nothing's wrong note. They were fairly cheap so time to try another brand.

                Comment

                • Manic01
                  Banned
                  • Dec 2008
                  • 5117

                  #9
                  As stated do you have a dect phone nearby?

                  Comment

                  • waterside
                    Newbie
                    • Feb 2012
                    • 5

                    #10
                    Originally posted by Manic01
                    As stated do you have a dect phone nearby?
                    No cordless DECT phone nearby. But you have got me thinking about something! I have the coax running through the loft. Maybe could be near to mains cable that are running through the loft. I'll have to check that one out. Maybe that's what causing this freezing up thing! I laid the coax on top of the insulation but didn't check what was underneath.

                    Comment

                    Working...