is this a good motorised dish deal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nsw9154
    Senior Member
    • Nov 2008
    • 259

    #1

    is this a good motorised dish deal

    i am wanting to get a motorised dish for my Blade after i have got the wife a free sat set up, seen this today on fleebay and was wondering if it is a good deal i wanted a Dark Motor but have not got a clue what dish or L&B to get is this OK for ?99

    1X ALSAT 100cm DISH
    1X GREEN GOLD 0.1DB LNB
    and of corse DARK MOTOR with
    1X HEAVY DUTY WALL MOUNT and fittings

    i can get it fitted by a local sat man for ?85 from South Seilds (North East England)

    what do you Experts think
    thanks in advance
  • lagerland
    V.I.P. Member
    • Sep 2010
    • 6031

    #2
    Dont sound bad not heard of green gold i would personaaly spend a bit more on the dish and lnb.The dark motor is about 50 so the rest is 49.I would go for a Gibertini dish and a invetro black ultra lnb you wont be disappointed remember you only get what you pay for and sometimes you buy cheap you buy twice...........

    And ya wall mount again i would go for T K brackets and 3 foot of scaffold pole...............
    Last edited by lagerland; 2 May, 2012, 09:28. Reason: Coz im shit.............
    I know you believe you understand what you think i said



    >>>>>>>>>>>>>>>> BUT <<<<<<<<<<<<<<<<
    I am not sure you realise that what you heard is not what i meant ! sigpic

    Comment

    • ramjet
      DK Veteran
      • Nov 2008
      • 2995

      #3
      buy an inverto ultrablack lnb and use that instead of the other one, only about ?10 on e bay

      otherwise I suggest you follow the help above, especially about using T-K brackets and scaffold pole

      Comment

      • nsw9154
        Senior Member
        • Nov 2008
        • 259

        #4
        Thank you for your replies i will search around and see if i can get them all from 1 suplier
        i think the Gibertini Dish might be a bit expensive are their any good alternetives as i understand if you buy cheep you buy twice and i want a system that will last for years

        Comment

        • ramjet
          DK Veteran
          • Nov 2008
          • 2995

          #5
          best alternative to a gilbertini is the triax td88 or td110

          I suggest you buy the darkmotor superior or supreme

          and the inverto ultrablack lnb

          then get the T-K brackets and a metre of scaffold pole as already mentioned

          anything else is really a compromise for a motorised system

          Comment

          • Manic01
            Banned
            • Dec 2008
            • 5117

            #6
            Your saying caught on @Ramjet
            Buy cheap buy twice
            Very true.

            Comment

            • nsw9154
              Senior Member
              • Nov 2008
              • 259

              #7
              after a lot of thought and some very good info from some good people on this site - i have decided to get & ordered

              1 -GIBERTINI -OP85L DISH ?75 free postage

              1 -DARK MOTOR SUPRIME ?49 postage included

              1 - INVERTO BLACK ULTRA LNB ?12 free postage

              total cost - ?136 and i am satisfied that i have got the best
              I decided against the TRIAX TD88 ?45 and went for the Gibertini for the extra ?30 i have not ordered any T.K Brackets yet because i do not know what size i need their are loads to chose from and i do not know what to order and will wait for some good advice from the great people on here -- it will be set up on a wall south facing bettween to second floor windows

              Comment

              • stew86
                Top Poster +
                • Nov 2010
                • 236

                #8
                PM the link to the the page on fleabay it might be the same one I got off there lifts it is the lnb is good but the dish is rubbish

                Comment

                • blueflash234
                  DK Veteran
                  • Mar 2009
                  • 904

                  #9
                  with a 1 metre dish you will need 24 inch t%k brackets to make sure the dish clears the wall

                  Comment

                  • ramjet
                    DK Veteran
                    • Nov 2008
                    • 2995

                    #10
                    as above , but some info too

                    the point about T-K brackets is you need to ensure that the dish clears the wall so you make sure the brackets are larger than the dish radius + allowing for the motor too

                    if you call a 1 metre dish 39 inches , and round up to 40 inches , you get half of that as brackets = 20 inches

                    but you then may need to account for them not giving enough clearance and so 22 inch or 24 inch would be better, and the bigger the standoff the safer it is

                    this is why 24 inch brackets were advised above, although 22 inch brackets should suffice

                    the motor and lnb are good value there, dont know that dish but gilbertini have a good reputation

                    Comment

                    • andiewill
                      DK Veteran
                      • Aug 2008
                      • 490

                      #11
                      Originally posted by ramjet
                      as above , but some info too

                      the point about T-K brackets is you need to ensure that the dish clears the wall so you make sure the brackets are larger than the dish radius + allowing for the motor too

                      if you call a 1 metre dish 39 inches , and round up to 40 inches , you get half of that as brackets = 20 inches

                      but you then may need to account for them not giving enough clearance and so 22 inch or 24 inch would be better, and the bigger the standoff the safer it is

                      this is why 24 inch brackets were advised above, although 22 inch brackets should suffice

                      the motor and lnb are good value there, dont know that dish but gilbertini have a good reputation
                      I have been trying to find this out in a long while so if you have a dish of 110 meters would a 24 inch bracket work with enough clarence, as i dont want to put my dish up and find that it is not.

                      ITgate TGM220 (swapable tuner), Dreambox 800 pro, Dreambox 500c x 2, DBox, Popbox media player.

                      Comment

                      • ramjet
                        DK Veteran
                        • Nov 2008
                        • 2995

                        #12
                        Originally posted by andiewill
                        I have been trying to find this out in a long while so if you have a dish of 110 meters would a 24 inch bracket work with enough clarence, as i dont want to put my dish up and find that it is not.
                        the explanation I gave is self-explanatory

                        Comment

                        • digicon
                          V.I.P. Member
                          • Jul 2009
                          • 8261

                          #13
                          18" T&K's with a TD110 will still give you clearence of around 58? east to 58? west, As for the Dish i have started using orbitals the difference between the Orbital 1m and a TD110 in signal is around 2-3db literally nothing but the price difference is around ?30

                          Comment

                          • lagerland
                            V.I.P. Member
                            • Sep 2010
                            • 6031

                            #14
                            Originally posted by andiewill
                            I have been trying to find this out in a long while so if you have a dish of 110 meters would a 24 inch bracket work with enough clarence, as i dont want to put my dish up and find that it is not.
                            24 inch TKs are no good for for your dish as its 110 meters biggest fcuking dish i have ever heard of ..............

                            But if you mean 110 cm then its fine.........................
                            I know you believe you understand what you think i said



                            >>>>>>>>>>>>>>>> BUT <<<<<<<<<<<<<<<<
                            I am not sure you realise that what you heard is not what i meant ! sigpic

                            Comment

                            • dick b
                              V.I.P. Member
                              • Jun 2009
                              • 2462

                              #15
                              Originally posted by nsw9154
                              after a lot of thought and some very good info from some good people on this site - i have decided to get & ordered

                              1 -GIBERTINI -OP85L DISH ?75 free postage

                              1 -DARK MOTOR SUPRIME ?49 postage included

                              1 - INVERTO BLACK ULTRA LNB ?12 free postage

                              total cost - ?136 and i am satisfied that i have got the best
                              I decided against the TRIAX TD88 ?45 and went for the Gibertini for the extra ?30 i have not ordered any T.K Brackets yet because i do not know what size i need their are loads to chose from and i do not know what to order and will wait for some good advice from the great people on here -- it will be set up on a wall south facing bettween to second floor windows
                              this is an 85cm Gibertini on 12" T&Ks with a 24" scaffold pole on a wall just west of south facing if you think the 12" are cutting it a bit fine use 18" T&Ks but you wont need bigger for an 85cm dish on a south facing wall.
                              PS you want to use the shortest T&Ks you can get away with to keep the dish as close to the wall(without hitting it) if you can I"d try the 12" 1st
                              Last edited by dick b; 3 May, 2012, 13:09.

                              Comment

                              Working...