my espn goes off everyday and have to refresh

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • njies01
    Junior Member
    • Nov 2009
    • 32

    #16
    Originally posted by seamouse
    well your wrong now,
    its used to check people with muti rooms ect that they are linked to right phone number and not being used aboard or at a mates house,
    they dial the box to make sure is live,if its not live , they double your bill, been reported all over the net the second box goes from ?11 a month to a full sub

    i did cable for 5 years as well
    Okay fair enough but why was mine stopped when it was not connectedto a pphone line?

    Anyway do you know how often do I put the card back in the box and for how long to avoidit bbeing stopped in future?

    Thanks Seamouse

    Comment

    • digicon
      V.I.P. Member
      • Jul 2009
      • 8261

      #17
      Originally posted by njies01
      Okay fair enough but why was mine stopped when it was not connectedto a pphone line?

      Anyway do you know how often do I put the card back in the box and for how long to avoidit bbeing stopped in future?

      Thanks Seamouse
      It should not have to go back in the original Box as long as one of your connections allows for updating of the card

      Comment

      • rigsby71
        DK Veteran
        • Mar 2009
        • 676

        #18
        You can allow one of your "connecting" boxes to send the EMM update to the card.

        Have a look on google as i am not really sure we can go more down this route here.

        Comment

        • njies01
          Junior Member
          • Nov 2009
          • 32

          #19
          Originally posted by digicon
          It should not have to go back in the original Box as long as one of your connections allows for updating of the card
          Thanks

          Where should the updating happen? In my dm500 where the card is or one of my four boxes that are receiving the channels?

          Comment

          • njies01
            Junior Member
            • Nov 2009
            • 32

            #20
            Originally posted by rigsby71
            You can allow one of your "connecting" boxes to send the EMM update to the card.

            Have a look on google as i am not really sure we can go more down this route here.
            Thanks will do.

            Comment

            • digicon
              V.I.P. Member
              • Jul 2009
              • 8261

              #21
              Originally posted by njies01
              Thanks

              Where should the updating happen? In my dm500 where the card is or one of my four boxes that are receiving the channels?

              if your reading it through the 500 then that should update it no problem

              Comment

              • njies01
                Junior Member
                • Nov 2009
                • 32

                #22
                Originally posted by digicon
                if your reading it through the 500 then that should update it no problem

                Thanks so basically do nothing then?

                Comment

                • seamouse
                  Senior Member
                  • Nov 2008
                  • 287

                  #23
                  set up dv something to the user you want to update and what i do is leave on ch5 at night, but does matter cards update all the time, mine in fact right now both cards show active
                  MY POSTS AND ANY PM`S ARE PURELY FOR EDUCATIONAL AND LEARNING PURPOSES

                  I AM FULLY RESPONSIBLE FOR MY OWN POSTS, MY POSTS ARE NOT CONDONED, MODERATED OR AUTHORISED BY ANY MEMBER OF STAFF ON THIS SITE AND I TAKE FULL RESPONSIBILITY FOR ANY CONTENT CONTAINED IN MY POSTS OR LINKED TO EXTERNALLY.

                  Comment

                  • njies01
                    Junior Member
                    • Nov 2009
                    • 32

                    #24
                    Originally posted by seamouse
                    set up dv something to the user you want to update and what i do is leave on ch5 at night, but does matter cards update all the time, mine in fact right now both cards show active
                    Thanks
                    What do leave on ch5? Your sly box?

                    Comment

                    • mdt
                      V.I.P. Member
                      • Feb 2009
                      • 3034

                      #25
                      Originally posted by njies01
                      Thanks
                      What do leave on ch5? Your sly box?

                      just put it on a ftv channel on your dm500s, motors tv or sony movies and if your configs are correct it should update it.... if not shove it in a s*y box overnight, s*y 1 or ch5HD or whatever and it will update eventually,regards mdt
                      DM800HDSE SIM 2.10. SSL84D OPEN-ATV ORBITAL 80CM/DARK MOTOR/IBU/53E-30W

                      Comment

                      • digicon
                        V.I.P. Member
                        • Jul 2009
                        • 8261

                        #26
                        Originally posted by njies01
                        Thanks so basically do nothing then?

                        Just a thought i said this assuming you had a satellite feed going to the 500 with the card inside if not then it will not receive the appropriate update

                        Comment

                        • ramjet
                          DK Veteran
                          • Nov 2008
                          • 2995

                          #27
                          Originally posted by njies01
                          Mine is a stand alone and no phoneline cconnected to it

                          I know for fact as I did a satellite course in my previous life that the phone line connecting to the sly box has only one purpose. That's is for voting such thingsas xX factor. It is a way of the box manufacturer making money and it ispart of the contractual requirements with sly to have the phone line in
                          they also dial the box to put right any technical issues like they did with my card and plus HD box when they could not enable the plus side in order to record and playback. and they use it to check its connected to the contractual phone line where a contract exists, like multiroom

                          the refresh interval is about 6 weeks, although its better to play safe and do it once a month if required

                          oscam web interface will tell you what entitlements you have and the expiry dates on each one

                          Comment

                          • njies01
                            Junior Member
                            • Nov 2009
                            • 32

                            #28
                            Originally posted by ramjet
                            they also dial the box to put right any technical issues like they did with my card and plus HD box when they could not enable the plus side in order to record and playback. and they use it to check its connected to the contractual phone line where a contract exists, like multiroom

                            the refresh interval is about 6 weeks, although its better to play safe and do it once a month if required

                            oscam web interface will tell you what entitlements you have and the expiry dates on each one
                            thanks very much for the info
                            Last edited by njies01; 18 December, 2012, 23:53.

                            Comment

                            • njies01
                              Junior Member
                              • Nov 2009
                              • 32

                              #29
                              Originally posted by digicon
                              Just a thought i said this assuming you had a satellite feed going to the 500 with the card inside if not then it will not receive the appropriate update
                              oh that is where i have been going wrong then. I have no satellite feed going into the dm500 server that has the card.

                              So if I take out the whitelist and make sure that there is a satelllite feed into the box then that should do the trick?

                              Thanks very much

                              Comment

                              • njies01
                                Junior Member
                                • Nov 2009
                                • 32

                                #30
                                can i check

                                I have put the feed in but does the box have to be on or can it be put on standby?

                                Comment

                                Working...