Terriers, can you help, i've just bought the above. Have installed the ippvr software. then says check pc ip adress unfortunately myn shows xxx.xxx.x.xx but should be xxx.xxx.xxx.xxx ie 12 digits long whilst the number i get is 9 digits long, driving me mad now. Please please help
-
-
if you pm me codge i will send you the settings..Last edited by terriers; 14 May, 2009, 20:28. -
sorry terriers i'm a bit wet behind the ears, what's pm mean!Comment
-
check your personal messages and youll find ive just sent you
the settings you need etc...if you have probs jus let us know...Comment
-
PM=Private message
Read the Rules here; they apply to Everyone.
___________________
In the good old days, I hadDM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Maxx 110cm Dish
Technomate 2300 Motors
sigpicComment
-
sorry to thread-jack here lads, I'm interested in obtaining one of these boxes and having a play about on the sat scene. How difficult are they to set up? Do they send you "adequate" english instructions shipped with the box? or can I rely on you guys for help? Also are you better with a Nanoxx or a Protek?Comment
-
protek and nanoxx are exactly the same with same software..
if you are ok with computers ie,,unzipping files and putting them
into a folder,then yes its easy...but if not you may struggle..
once set up they are easy to maintain with soft updates going straight to box with the press of a button...
ps the protek is cheaper selling for 109 at wizard satellite,and also looks better than the nanoxxLast edited by terriers; 19 May, 2009, 17:50.Comment
-
Unzipping etc is no problem.... it's where to find the files in the first place thats the trouble!! I take it you have to set up a network with the box then transfer a few "choice" files before configuring to the net? Then it's plain sailing?Comment
-
there is 3 pieces of software you need on the box for it to connect to the server,,and it will come with some already on but not the latest versions...if the bootware on the box is 1.33,,,or 1.34,,,you can use the webloader to put the bits of software directly onto your box from your computer this is easiest way...but if b/ware is lower than 2 mentioned,you will have to use a null modem cable to transfer s/ware across...
the latest s/ware needed is openly available at a couple of sites and i can pm you the links if you decide you need them....
and as iv said earlier once its set up you can then auto update by pressing a button on the remote....
and there is room also to add 3 different newcamd servers as well if you like..Comment
-
Protek 9600 IP
Just bought a Protek 9600 IP and trying without success to find newcamd software / info to place software on machine which is connected to a router. Can anyone assist?Comment
-
i have just sent you link for software if you look in your personal messages..Comment
-
No luck
I ve tested with my protek on newcamd, but no picture.
Have anyone luck??Comment
-
yeah i`v tried mine on newcamd and it works fine...
if you are trying a free newcamd off a dodgy site dont bother
they never work.....but the pay ones do....if its sky uk your
wanting dont bother unless your happy with picture freezes every 10 seconds....it will never run properly on this box...Comment
-
my box down
can sum one send a newcamd acount for me to try i aint seeing sh#t nowComment
-
keep anything like this to pm's pleasePS3= krazylegz120282
please read the rules >>>>http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/
if you're new to forums and want to make your first post please read here>>>>http://www.digital-kaos.co.uk/forums...ul-tips-30279/
if you like what people say please use the reputation or thanks button, dont just make a post to say thanksComment
Comment