Sky FTA Channels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gums
    Member
    • Oct 2008
    • 63

    #1

    Sky FTA Channels

    Have just had sky + HD installed in the main room and asked the installer to run me a cable to a bedroom as there's no aerial feed into there.

    My plan was to use a mates old Sky + box in order to receive the FTA channels. The box still has the old viewing card which has now been cancelled.

    Ive hooked the box up but can only get ITV and Ch 4, no BBC etc - i thought id be at least able to get all of the terrestrial channels 1-5.

    Anyone got any ideas as to why this is?

    TIA
  • .: JaCkPoT :.
    Retired Sat TV Addict
    • Aug 2008
    • 5607

    #2
    maybe the region settings are wrong...take the card out and try!

    Read the Rules here; they apply to Everyone.

    ___________________
    In the good old days, I had
    DM800s HD
    Openbox S10
    TM500
    DM500s
    90cm FortecStar dish
    Maxx 110cm Dish
    Technomate 2300 Motors

    sigpic

    Comment

    • gums
      Member
      • Oct 2008
      • 63

      #3
      box comes from a mate round the corner, so it will be in the same region - ITV shows Tyne Tees which is where i'm at.

      Tried to remove and reinsert card last night but still only ITV and Ch4 available, i could understand if Ch4 and Five were the missing ones, but to not have BBC stumps me?!

      Suppose i can try without any card at all, as i should be able to pick BBC up then even without a card, yes?

      Comment

      • .: JaCkPoT :.
        Retired Sat TV Addict
        • Aug 2008
        • 5607

        #4
        goto chnl 941 i think it is...this is where the regional channels for bbc are..sorry if its a ~~~~ channel but the bbc regions are somewhere around there!

        Read the Rules here; they apply to Everyone.

        ___________________
        In the good old days, I had
        DM800s HD
        Openbox S10
        TM500
        DM500s
        90cm FortecStar dish
        Maxx 110cm Dish
        Technomate 2300 Motors

        sigpic

        Comment

        • lincsat
          DK Veteran
          • Jun 2008
          • 1228

          #5
          Make sure the LNB settings are all at default, it could be that you have a faulty LNB, can you try your HD box in the other room or the Sky+ in the main room?

          Comment

          • gums
            Member
            • Oct 2008
            • 63

            #6
            lincsat - how do i get into LNB settings?

            its a new quad LNB but i s'ppose it could be faulty, will try a box swap tonight.

            Comment

            • gums
              Member
              • Oct 2008
              • 63

              #7
              thanks for the help - ended up plugging the box into the main room's feed which i knew worked and hey presto all FTA/FTV channels were accessible.

              upon moving the box back to the bedroom and plugging back in, i connected only dish 1 input and managed to get all of the channels, connected the 2nd input and lost BBC momentarily but all now seems to be working okay.

              Strange one, not really a clue what the problem was, as i'd already rechecked the aerial inputs a few times.

              Maybe just the hard reboot thats sorted it?!

              Comment

              Working...