With you saying that you have a +3 degrees when you send the dish to a satellite, that could mean that you will have to move the motor on the pole by 3 degrees to get it right, this may solve it for you. (use 11747v 30000)
DEN
DEN
-
Last edited by den1; 31 August, 2016, 10:53. -
Does this Mean that I will always have to go to the motor and manually add 3 degrees after I change a channel or something?Comment
-
YES, When you are using USALS as your set-up, (if you set the motorised system up correctly you would not have to a change when you go to another satellite).
There is a way around this if you do not want to get a ladder out and move the motor, use the DiSEqC 1.2 setup and to each satellite in turn and save.
Hope this helps
DENComment
-
managed to fix the problem. how i did it is written in my initial post in this thread.Comment
Comment