My SKY card entitlements has ran out yesterday...it seems that it will not update in the TM600. So i have reconnected up the Digibox and inserted the card. Can anyone tell me if the phone line still has to be connected to the digibox for it to update ? And how long before its updated ?
Entitlements need updating...Info please
Collapse
X
-
-
no, doesnt need to be connected. should take half hour or so but best to leave for 12 hours
it should update using cccam
dcWavefield Ds 55cm at 13E 19E and 28E receiving everything out there on 2 dm800hd
previous life dm800hd and 500c on cable
screw you nag3 
-
Thanks for the info...I am also sorry for the post in the Technomate section that seems to be asking the same question ( admin please remove if necessary ) So as long as my TM600 used to work with the sky card, and its running 2.1.4....I can use that to update entitlements ?? Therefore the digibox can be put into the loft ?Comment
-
Sometimes the Sky Card will not update using CCcam, other times it does. With ccam it can take more than 12 Hours. If you leabe on CH 4 on Sky box it takes about 4 hours for complete entitlement update . . .Thanks for the info...I am also sorry for the post in the Technomate section that seems to be asking the same question ( admin please remove if necessary ) So as long as my TM600 used to work with the sky card, and its running 2.1.4....I can use that to update entitlements ?? Therefore the digibox can be put into the loft ?
Read the Rules here; they apply to Everyone.
___________________
In the good old days, I hadDM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Maxx 110cm Dish
Technomate 2300 Motors
sigpicComment
-
Comment
-
hmm, put it back in the sky box overnight then. but your cccam should be setup to recieve updatesWavefield Ds 55cm at 13E 19E and 28E receiving everything out there on 2 dm800hd
previous life dm800hd and 500c on cable
screw you nag3 
Comment
-
Comment
-
Comment
-

Comment