Openbox S10 V2_New_Red_GUI By_AnonymouSX

[paulkelly]

get total menu lock out when trying to use

[grahampaull]

get total menu lock out when trying to use

Pin is 0000, you can disable the pin.

[sudipta001]

my chip id 9cf4 .... can i use this farmware,,,,

[DW190]

my chip id 9cf4 .... can i use this farmware,,,,

Firmware is clone safe.

In any event you should keep a copy of the firmware which came with the box.

[sudipta001]

i use C2HS2-12-05-15-0578cmt. farmware.. can i use the Openbox S10 V2_red farmware ... plz help me....

[DW190]

i use C2HS2-12-05-15-0578cmt. farmware.. can i use the Openbox S10 V2_red farmware ... plz help me....

If its an openbox yes.

If you use the one in the post below it will have channel list built in with named catagories.

http://www.digital-kaos.co.uk/forums/f184/openbox-clone-safe-uk-channel-list-263990/

[rjarl]

Hi!,
I have an OpenboxS10 too, I'll try to upgrade it now.
I supose that i can use this firmware with any satellite and any proper configured ccam isn't it?

I'll update.

**** UPDATE 2012-04-13 ************* 0:15 AM (GMT+2)
It works, it rocks!!!! Thanks guys. It's awesome. GoodWork

**** UPDATE 2012-04-15 *************
I can confirm that it hangs working 19h nonstop. But it's very very fast. It worth the change.


Cheers
Rjarl

[PaulSPB]

I have update my s10 (china) with this firmware but...

Is anybody face with the problem that USB is not mount? And STBHD_LAN_MM doesn't work.

[slugworth]

only with certain hardrives.
use rs232 to upgrade firmware to get lan option working.
The firmware has to be may 5,2011 or later for lan.

[PaulSPB]

I see. Do you know (recommend) hard drivers, usb flash that will works?

May 5, 2011? But I use from anonymousx (download link on the 1-st page this topic) and it's from 02.02.2012!?

only with certain hardrives.
use rs232 to upgrade firmware to get lan option working.
The firmware has to be may 5,2011 or later for lan.

[slugworth]

hd

I see. Do you know (recommend) hard drivers, usb flash that will works?

May 5, 2011? But I use from anonymousx (download link on the 1-st page this topic) and it's from 02.02.2012!?

I never got any hardrive to work,so I gave up.
If the ethernet isn't working, the network settings are wrong.
DHCP to off and the default address is 192.168.001.108

[jonthebus]

wurks fine,no probs ,mine is clone box s10

[PaulSPB]

I never got any hardrive to work,so I gave up.
If the ethernet isn't working, the network settings are wrong.
DHCP to off and the default address is 192.168.001.108

I try to connect, but unsuccessfully.

Tell how it was: I switched DHCP off and assigned manually ip address 192.168.001.108, 255.255.255.000. Then I connected openbox to PC (192.168.1.1,255.255.255.0). Ping to 192.168.1.108 passed. In stbhd_lan utility specified openbox's ip address as 192.168.001.108, pass 0000 (I don't change it). I got messages: Now connecting to BOX...wait 20 sec.; Can not connect!

[Rouwdy]

Try your ip like this 192.168.1.108

Grz;
Rouwdy

[PaulSPB]

Try your ip like this 192.168.1.108

Grz;
Rouwdy

Thanks for advise, but it doesn't affect. (