Help with gift installation.

[up2nogood]

Hi,

I have a Protek 9700 HD.
I have a gift which i'm not sure how to get it to work.
I have the codes etc to get it to work! but i can't find the right menu to sort it out.
I was told to do this to start with.

Enter into openbox as follows - menu, world icon, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

well i got to the world icon,(which say installation) but i can't seem to find the rest! maybe there is another way.
Does anyone have any idea plz

Cheers.

[mtv1]

ok i'm at logger heads here open box press blue not green

this is breaking the rules also no cs talk

is the protec an open box or are u trying to setup your box ccccam usually in setup

host = ????
port = ?????
uesr = ????
pass = :::

although depending on box ?? openbox or protec ?????????????????//

[up2nogood]

Hi.

I'm new to all this so I'm learning. I'm trying to set it up to get the channels. As for open box, not really sure what that means. As of course I'm still learning. I have port user pass. But surely I shouldn't write it here as someone else might use it no? Like I said I'm new to this and we all got learn
If someone with some patients could help I be greatful.

Thanks very much.

[darcu5]

try looking in network setup instead of installation setup(world icon)

menu, NETWORK SETUP, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

[up2nogood]

try looking in network setup instead of installation setup(world icon)

menu, NETWORK SETUP, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

All i have in network setting, is

Network enabled
mode DHCP
IP
Subnet mask
Gateway
DNS1
DNS2
MAC

Do i have to install something to get different menu?
As just learning as i go along

Cheers.

[darcu5]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

[up2nogood]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

Hi,

Thanks for that, i'll have a read!
Can you explain what openbox means?

Cheers

[slugworth]

protek

Hi,

Thanks for that, i'll have a read!
Can you explain what openbox means?

Cheers

if you explain what protek means
this is the openbox receiver section

[lagerland]

Its just a receiver mate....................

[up2nogood]

if you explain what protek means
this is the openbox receiver section

Can someone plz tell me what open box mean?

It's the name of the sky box i'm using, protek 9700.

Ok where do i go for some help, us like i said im new to this!

Cheers.

[up2nogood]

Its just a receiver mate....................

You guys plz im new here! im learning
So open box mean it's just a receiver ?

The receiver i have is a protec 9700.
Anyway no worries i'll keep searching

Thanks anyway.

[up2nogood]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

Gosh that look so confussin
But did't help really..

Anyway guys thanks for trying!

[lagerland]

No one said it was easy m8 just read till your eyers bleed your get there in the end..................

[up2nogood]

No one said it was easy m8 just read till your eyers bleed your get there in the end..................

I got all the channels etc setup..

Just don't have the menus to add the my uk gift.

Just not sure how to get to the right menu to the gift.

I'll keep researching.

Cheers.

[darcu5]

Ok i found a little bit of info. don't know if its any good or if it makes any sense

pushing usb and screen+ keys opens the newcamd menue. 16 servers/1 port each are available, hence max 16 3rd party packages can be opened on top of the publicly available ones.

after having obtained server access data from your 3rd-party provider, type in server name = dns of your server (with server ip dns set to on), or numeric server ip in server ip (if dns is set to off).
port, user id and password will have been provided by your provider - type it in the appropriate spaces.
disregard emm, but set protocol to newcamd - and if your provider has cleared you, the leading light indicator will switch from red to yellow/green and you should have pictures now.

the use of the the red, green and yellow keys are self-explanatory, but note: it happens that you'll get freezes or black screen on some packages sometimes - this has got nothing to do with the box but is due to the 3rd party server capacity and/or performance/connectivity. use red key to reset server connection - it does help!

enjoy