Hi guys I wonder if you can help me my open box x3 arrived yesterday installed fine scanned 2 satellites was all working perfect went to scan a third satellite it got to 100% then froze, I turned the power off then back on again now all I get on my open box x3 display is a dull number 8. can you guys help me?
Openbox x3 Dead...
Collapse
X
-
Tags: None
-
Here you go. Try the attached Upgrade programme.Hi guys I wonder if you can help me my open box x3 arrived yesterday installed fine scanned 2 satellites was all working perfect went to scan a third satellite it got to 100% then froze, I turned the power off then back on again now all I get on my open box x3 display is a dull number 8. can you guys help me?Attached Files -
Do I just connect it all and run EromUpgrade i keep reading about a batch file but I don't know what that does or how to use it?
thanksComment
-
Just connect it up and enter the abs file that in the file uploaded. Tick include bootloader.
Box powered off
Start the loader
switch box on
May need a few attempts.
If your using a laptop with a USB to Serial adaptor you need to select the correct port.Comment
-
that file is just the loader
you will still need the proper firmware to load.
I don't think it works with usb adapters.
The batch file just made the proper eromclient.abs file
for a version that had support for different models.
That zip already has the proper file.Comment
-
OK thanks, I have ordered some parts will let you know how i get on
Comment
Comment