Multi Room

**mark8393** · 27 January, 2013, 21:29

Originally posted by tedldoo

Hello,

I have 2 Openbox S10 boxes coming off individual feeds off a quad LNB dish
I have 1 on a direct ethernet feed from my wireless router and 1 fed via a WiFi Bridge fed from the same router.

I am only able to watch via the boxes individually, if i have both boxes switched on I am only able to watch the one fed by the ethernet cable, the other box has scrambled channels.

I have checked the settings and find the IP address are the same on each box, the baffling thing is I also have 2 cable boxes which are internet fed in exactly the same way and they have different IP addresses and they work fine.

I am presuming it is the IP address element that is the issue.

Any ideas or suggestions would be gratefully received.

Thanks in advance

yes down to ip being the same, cant do much about it. contact supplier for multiroom

**andy91** · 27 January, 2013, 21:30

You said it make sure either box has a different ip address and make sure you're allowed to do that with your supplier,

Andy.

**mjon** · 27 January, 2013, 21:33

you need to contact your sever to have muti room enabled, if he allows it

andy91 you just beat me too it

**tedldoo** · 27 January, 2013, 21:52

Thanks for the replies, maybe I was a bit foolish in taking out 2 separate subscriptions without checking if they would work off the same internet connection, the surprising thing to me though is that I have asked my subscription provider for assistance in sorting this out and none of their suggestions have resolved the problem, I would have thought that if I needed a different subscription they would have mentioned it...mmmmmmm

**mark8393** · 27 January, 2013, 22:03

If you took 2 separate ones you should be fine m8, defo get hold of them and tell them to sort it

Multi Room

Multi Room

Comment

Comment

Comment

Comment

Comment