Skybox F5 Hz Rate

[road]

Hello d-k members i just have a my problem about SD channel F5 working good on all HD channels but it is not same on some SD news channel making vibration on the news strip you know has news strip under screen in the news channel why making vibration on the write's i am using 1080i 50 hz on setting and also my lcd tv 50hz.. is that reason maybe i need 1080i 30hz setting... is there any firmware for this what is last firmware for F5 why making vibration any idea? and can i put e2 on F5 or via USB.. could be different firmware... thank you very much regards

[road]

any answer? i hope will come 1080i 30 or 25HZ settings next upgrade because i need them for good pic thanks

[road]

i want to send an e-mail to the skybox company for 30Hz,25Hz option maybe they can do on next update is there any e-mail address? thanks regards

[cactikid]

are you using a good quality hdmi cable?its the little things get overlooked.

[genam]

no such thing as 25 or 30 HZ setting ...tv's need 50 or 60 or higher to prevent eye strain from flickering as the human eye can detect motion at about 15-20 hz

My tv is just HD ready and theres no flickering....try some of the other settings such as 720p and see if it affects the issue you have.

[road]

are you using a good quality hdmi cable?its the little things get overlooked.

I already using philips gold hdmi cable but still same i don't think so problem hdmi cable

no such thing as 25 or 30 HZ setting ...tv's need 50 or 60 or higher to prevent eye strain from flickering as the human eye can detect motion at about 15-20 hz

My tv is just HD ready and theres no flickering....try some of the other settings such as 720p and see if it affects the issue you have.

yes right my tv 40c530 lcd tv 50hz tv maybe could be that is problem if was be 100hz maybe no problem but my tv 50hz and using 1080i 50hz option on f5 i heard there is 1080i 30hz and 25hz option on X5 but no on f5 why i don't know .. i did try 720p option but still same i just need 30 or 25hz option i understand this .. i am not sure what can i do else .. thanks all regards

[road]

is there any skybox e-mail address i can't find any e-mail... skybox the team please hear me i need 1080i 30,25 Hz settings .. thank you very much regards

[mahrkpat]

If it is only some channels that are affected then it will not be your skybox, the problem you are describing can be caused by a cordless phone, if you have cordless phone try switching this off at the mains for testing purpose and see if it makes a difference.

[road]

If it is only some channels that are affected then it will not be your skybox, the problem you are describing can be caused by a cordless phone, if you have cordless phone try switching this off at the mains for testing purpose and see if it makes a difference.

Hi mate are you sure about that really weird a comments ok i will try this but i don't think so mate ... what about this yuv better than rgp ? ... why i can't get 1080i on rgb ... only has 576i on rgb but has 1080i only yuv i guess that is not possbile rgb 1080i...

[digicon]

The RGB & YUV respectively belong to Scart and S-Video connections in other words Analogue, RGB was used to seperate the 3 main colours from one device to the TV and YUV was Chroma seperation as well.

HDMI is a pure digital source and as such does not need any form of seperation technique to reproduce a solid clean picture.

So when selecting HDMI anything selected below 720p is being down converted, so you should really leave this at 1080i

[road]

@digicon i understand mate thank you very much i just thought maybe that is why of my problem maybe you know 50Hz more coming for my tv .. it already 50hz tv i just guess must be 30hz but no option on f5 ..

[digicon]

Although your TV Plasma/LCD/LED maybe capable of 30hz i am afraid that the standard for satellite receivers is just either 50hz or 60hz which is 25/30 doubled the only other medium to accept a lower hz rating is Blu Ray where the defacto standard is 1920x1080 @ 24p some Blu rays i have encountered are or have been capable of 30hz but satellite does not need these differing standards

[road]

my tv 40c530 50hz lcd tv when i selected 60hz all channels logo's i mean all screen flickering but when i selected 50hz option only flickering under of screen i can see on news strip so i understand i must select a number less than 50hz.. i saw 30,25hz option on some hd receiver that means .. this option's not unnecessary right ..

[digicon]

The first option to try and eliminate the flickering is to turn off all picture processing that your TV has such as Film Mode, Noise reduction Filter etc.. this is so the picture you see through the HDMI for the receiver is as natural as possible and hen lets see if the flickering is still there. Also would be handy if you could upload a small clip of the flickering in action so that people can see what you mean

[road]

The first option to try and eliminate the flickering is to turn off all picture processing that your TV has such as Film Mode, Noise reduction Filter etc.. this is so the picture you see through the HDMI for the receiver is as natural as possible and hen lets see if the flickering is still there. Also would be handy if you could upload a small clip of the flickering in action so that people can see what you mean

i understand i am using standart mode i already Film mode and Edge developer closed also dynamic contrast closed 25 sharpness etc. there is no Motion plus 40c530
Diji Parazit Filtre : auto. - MPEG Przt Filtre auto i don't know what can i say and i really very surprised i did record a few minutes on flickering channels and i watched video at the pc there is no any flickering i guess problem is tv settings right? everything is good in video