cross epg

[porter1]

usals wont work,mad cos it always locks onto all the sats before this box

[satsmo]

And you both believe what you read. I will flog my tuner until I get 100% out of it and if not I will complain to the manufacturer, whom I am sure will check it's amplitude

I have tried numerous locations and numerous SE models without hitting 100%, so I am jealous as I cannot take any screen caps

[alom5]

Yep, alom is correct, pulling 100% here from a 1m dish with a 50m cable run

50m run???? blimey mate you weren't joking when you said you were supplying the street or you got some faaaaaat hous...or shall i say stately home

[alom5]

usals wont work,mad cos it always locks onto all the sats before this box

are you on fixed or motorised porter?

[porter1]

motorised,ill have another go in morn

[alom5]

mess about with the longitude settings. change in 0.2 degrees and you can see the snr change. as even if the sats off you can still get it sorted. mine should be 0.4w...but i got it set as 0.9e

[porter1]

messed with usals,not working,never has,on itv on the screen says 37%,go into positioner set up ,get that transponder 10758 and it says snr 100%,why is thos baffled now my mistake thats sd channel

[porter1]

gonna check the tuner isnt loose when i get chance,just talking to jennt in china then,hopefully is fingers crossed

[porter1]

i cant understand if ye get great signals on the 800,disconnect ,plug se in and set up the same ye get 37% signal,whats happening

[porter1]

well i changed catseyes settings and threw on flip flop from here and they opened,still only says low figured but not breaking up,great picture in hdmi,how do i configure crossepg,downloaded it before is it ftp editing or on the dream