Commando 14.6 DM500 Release

[jw2000uk]

Is there any way of installing E1 plugins on this?

Trying to install Satfind.. And C**am Info..

Mainly after a way of showing the ECM?

Unless im blind and have missed it ;-/

[grizzlygaz]

Transponder

How can you add a transponder to include in a scan ? I cannot see any way to add one. The problem is that Primetime is not showing up, probably because the transponder is not in the transponder list but its eluding me as to how to add it.

[athenrybhoy]

hi guys getting lots of freezing with c.14.6 - ccam 2.2.1 ,was using pli jade before this and was pretty good will have to go back if i cant sort this any ideas? thanks

[pjmorie]

Is there any way of installing E1 plugins on this?

Trying to install Satfind.. And C**am Info..

Mainly after a way of showing the ECM?

Unless im blind and have missed it ;-/

To see the ECM time (if that's what your talking about) press the BLUE button, then select Commando Exra Menu, then Softcam Menu followed by Camd Status

[iain66]

How do I get to see locked and hidden bouquets please

[pjmorie]

How do I get to see locked and hidden bouquets please

Press the following button sequence:
BLUE -> BLUE -> YELLOW -> 2 -> RED

or go through the following menu sequence:
Blue Button -> EPG & Autobouquets Wizard -> Set My Location & Autobouquets -> Autobouquets Wizard -> Autobouquets Selection

This should bring up a list of the bouquets where you can chnage their status.

[gulcan]

Thanksss. Perfect work.
My question How to Hotbird 13 unlock channals?

[psats]

How do I get to see locked and hidden bouquets please

as above or use the box bouqet editor

menu / services / bouqet editor

[spudorange]

looking for a reply to my thread regarding box being shagged once a new "setmylocation" or "rescan"

detailed in thread 199 + further info 203

To recap:

flashed, init copied location & get epg and is fine BUT:

After a while a rescan or setlocation is needed, OOPS, now epg is a no no, so only way back is complete reflash:

I ask anyone (with the time and patience) to try the above, (setmylocation for instance) and your epg scan will take 1 second max, as in NO epg and you will, I am certain have to reflash and start over.

I am an "it ain't broke" person but when channels are lost, tp's are moved etc, I do get lumbered with sorting it, so.....

Come on anyone that knows why, Just need to understand it.


thanks

[bob114]

looking for a reply to my thread regarding box being shagged once a new "setmylocation" or "rescan"

detailed in thread 199 + further info 203

To recap:

flashed, init copied location & get epg and is fine BUT:

After a while a rescan or setlocation is needed, OOPS, now epg is a no no, so only way back is complete reflash:

I ask anyone (with the time and patience) to try the above, (setmylocation for instance) and your epg scan will take 1 second max, as in NO epg and you will, I am certain have to reflash and start over.

I am an "it ain't broke" person but when channels are lost, tp's are moved etc, I do get lumbered with sorting it, so.....

Come on anyone that knows why, Just need to understand it.


thanks

hi

After a while a rescan or setlocation is needed, OOPS, now epg is a no no, so only way back is complete reflash:

you must reboot the reciver before downloading epg
a reboot is needed after auto bouquets update etc each time for epg to work again (you can load epg as meny times as you like after reboot just make sure to reboot again after rescan etc)

hope this may help

[spudorange]

Hope it does

as I do have time on my hands I will try it

thanks for the input

hi

After a while a rescan or setlocation is needed, OOPS, now epg is a no no, so only way back is complete reflash:

you must reboot the reciver before downloading epg
a reboot is needed after auto bouquets update etc each time for epg to work again (you can load epg as meny times as you like after reboot just make sure to reboot again after rescan etc)

hope this may help

[spudorange]

Just done a rescan and epg is shagged again so I have had no choice but to reflash.

No amount of switching box off and on worked, neither did re sending the "init" file.

No big issue if a box is here, BUT this means EVERY box has to come back here for a reflash

This has happened around 8 times now so I know there is an issue that needs resolving.

hi

After a while a rescan or setlocation is needed, OOPS, now epg is a no no, so only way back is complete reflash:

you must reboot the reciver before downloading epg
a reboot is needed after auto bouquets update etc each time for epg to work again (you can load epg as meny times as you like after reboot just make sure to reboot again after rescan etc)

hope this may help

[psats]

Just done a rescan and epg is shagged again so I have had no choice but to reflash.

No amount of switching box off and on worked, neither did re sending the "init" file.

No big issue if a box is here, BUT this means EVERY box has to come back here for a reflash

This has happened around 8 times now so I know there is an issue that needs resolving.

if you look at the home site you will see that itv has now cocked stuff up
aswell as the bbc for the epg.
the working epg is still 1000% better than any other image out there.

[spudorange]

if you look at the home site you will see that itv has now cocked stuff up
aswell as the bbc for the epg.
the working epg is still 1000% better than any other image out there.

That might be so if it was working, if you read my post it explains this:

after a setmylocation (which runs auto bouquets) and a reboot I get the following

rtgetepg, takes a whole second to get absolutely zero epg

getepg shows a glitching screen of satellite and the lraizer credits, when finished NO EPG

So there is an issue

5 boxes, 8 tries, the problem appears to be firmware related after BslyB screwed things up.

a workaround is as follows "BUT ON A NEW FLASH ONLY", not after re doing the setmylocation a week after for instance.

see below:
============================================

"Originally Posted by PaphosAL Earlier today, BskyB kindly went and busted LraiZer's GetEPG. How? By changing the special stream epg service "EPG Background Audio." from service_type="02" (radio) to service_type="82" (data)

The problem will become apparent after a run of AutoBouquets"
============================================

[psats]

That might be so if it was working, if you read my post it explains this:

after a setmylocation (which runs auto bouquets) and a reboot I get the following

rtgetepg, takes a whole second to get absolutely zero epg

getepg shows a glitching screen of satellite and the lraizer credits, when finished NO EPG

So there is an issue

5 boxes, 8 tries, the problem appears to be firmware related after BslyB screwed things up.

a workaround is as follows "BUT ON A NEW FLASH ONLY", not after re doing the setmylocation a week after for instance.

see below:
============================================

"Originally Posted by PaphosAL Earlier today, BskyB kindly went and busted LraiZer's GetEPG. How? By changing the special stream epg service "EPG Background Audio." from service_type="02" (radio) to service_type="82" (data)

The problem will become apparent after a run of AutoBouquets"
============================================

if you install the init after you have done the set location and dont set daily run of set location or auto bouqets the epg wrks fine you only need run a standard scan IF channels have moved.