If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I thing yours is clone and you are trying to flash with orginal image. Now you have to flash again with approprate bootloder and flash the right image for the clone DM
Mine is clone too. Where to find the right or patched image for DM800 for BL76
This guide is for those who have DHCP Server....what about if you don`t?
can you please show us HOW TO setup an IP address in the bootloader's serial setup.
just set up my new dreambox, with hotbird and astra satellites. was looking for any helpful info as to what are the best steps to do next. been reading loads info but advice on best image and other things to make the recieving of programs "much better" would really be appreciated
I'm new to all these things with DM800. Friend of mine he has DM800 HD (clone) and his image is dated end of 2009 or something like this. Can someone guide me where to find latest image for DM800 HD (clone)? Sorry in case of off top....
THE TRUTH
The Hillsborough Independent Panel. 12/09/12
Today's report is black and white.The Liverpool fans were not the cause of the disaster.
The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'.
hi, 800se clone will be arriving this week.
I have been reading up on how to flash. Question is when flashing via web browers do you first have to use Sunray Flasher using usb cable?
On some guides they tell you to load sim2SE_SSL82 before and after flashing image in brower.
Is this step only needed if the boot loader is not in the image?
still learning
Thats very good but where do you aquire the latest flash image for the DM800HD in the first place. Without it all these instructions cannot be used.
Thanks
Comment