Tut on how to fix NO CA on all DM800HD

[theruler]

I don't see any movement in dreamup at all. It just can't see it. box type stays blank. Thanks for your help

[dave2014]

I have had this problem too after flashing a new image. I have now managed to get it to boot into an image using bl69, if i try any other bootloader I get the no ca error again. Image boots up but when it gets to where the tuner config page should be it gets "system error hardware could not be verified", Please any ideas anyone

[dave2014]

My box is now working correctly after reflashing. Only problem is I still cannot get any other boot loader to work apart from bl69, if i try another bl box just reverts back to no ca error. When my box arrived it had latest sim and bl76c. There must be a way to get this back on or does this mean there is a problem with the sim or box as no matter what i try no other booloader will work.

[dave2014]

Anyone with an idea? I have searched all threads and tuts and tried everything I can think of. Box is working pretty perfectly but I would still like to get the proper/latest bootloader back on to it or know the reason it wont except bl76 anymore

[chatty]

dream up

hi all.

trying to fix no ca problem but when i use dream up i get this message. unable to open com port, aborting. i'm using a usb adapter and vista. any help please.

[Bulld0g]

hi all.

trying to fix no ca problem but when i use dream up i get this message. unable to open com port, aborting. i'm using a usb adapter and vista. any help please.

Try getting to a pc and use a null modem if you can. I have never been able to flash any box using a USB adapter,I know others have succeeded but I never have.

[tkm18]

Try getting to a pc and use a null modem if you can. I have never been able to flash any box using a USB adapter,I know others have succeeded but I never have.

You were on my thread from last night, usb to serial worked no problems using Windows 7.

[Bulld0g]

You were on my thread from last night, usb to serial worked no problems using Windows 7.

As I said other people have had success but i haven't.

[cunny]

Depends on the USB-SERIAL Adapter. I have flashed boxes with these and without these. There are Drivers to contend with on adapters, where as straight serial you aint.

[dave2014]

Well out of complete frustration I took my box to bits and then removed sim only to find my sim was not 2.01 as advertised but an e-star sim ver 3, which you have to flash using certain images and certain tools which are on the estar website. I have now reflashed with estar patched software and now everything is back to normal, bl76 back on and web interface now shows all correct information insrtead of question marks ;-). So if you have the no ca found error which just seems impossible to get rid of, it maybe due to you having a new estar sim and therefore flashed an incorrect image/bootloader on it. Images for estar sims must be patched before install using there own convertor software. Hope this helps someone as it is such a frustrating problem.

[fahimjan]

Dear friends , i have the same problem , my dm 800HD not working will , when the ip comes on Screan of the box , the Ethernet light goes off and dm not working and also not connected with Dream up software.

I also tried the DreamUP_patched_by_forhike_and_natas software , still not connected !



Thanks

[larsjeee]

Well out of complete frustration I took my box to bits and then removed sim only to find my sim was not 2.01 as advertised but an e-star sim ver 3, which you have to flash using certain images and certain tools which are on the estar website. I have now reflashed with estar patched software and now everything is back to normal, bl76 back on and web interface now shows all correct information insrtead of question marks ;-). So if you have the no ca found error which just seems impossible to get rid of, it maybe due to you having a new estar sim and therefore flashed an incorrect image/bootloader on it. Images for estar sims must be patched before install using there own convertor software. Hope this helps someone as it is such a frustrating problem.

Same here, also had a e-star sim ( at first I didn't know I even had a clone) knowing that, went to e-star's website and followed the tutorials there, now my clone works 100 % again, with every image (as long as it is patched by the conversion util on e-star's website)

So everyone, first find out if you have an e-sim, otherwise all other methods will fail!

[xipi]

I have got the same problem of NO CA FOUND,Used all the dreamup you can imagine.All te cables also,After thousands times of plug power on and off the box gets allive, and i can connect by cable rs 232 null to the computer.Mine is Dream 800 HD PVR with sim 210 never been used. Came withSVN(099r1), 10-11-2011 nemesis enigma 2.Happy and start dreamup and injecting with bootloader #76,later #82,#84,#84a,#84b.Used nemesis,gemini,pli and so on.After every hour of flashing i still get the same error at dremaup box"010 INVALID NAME ( OR OLD VERSION ) FLASHING FAILED.BOX UNUSABLE.,Now i got the box starting and hangs at midle and shows TVI after that SCART and later PVR....
I apreciate any help or advice
In advance many thanks at all people.
Pardon my English
Xipi

[xipi]

Hey people.My dream 800 hd pvr is working now !!!!
After to my last post.i start (with,by cable rs232 null modem) and dreamup V2009 patched forhike and natas,and the secondstage-67 nfi and flash with Nemasis 2-3-dm800 Svn 093 ramimaher.nfi and NOW IS BOOTING NICE
THANKS TO ALL
HAVE A NICE DAY.
MINE IS SMILING
XIPI

[icecave89]

Hey people.My dream 800 hd pvr is working now !!!!
After to my last post.i start (with,by cable rs232 null modem) and dreamup V2009 patched forhike and natas,and the secondstage-67 nfi and flash with Nemasis 2-3-dm800 Svn 093 ramimaher.nfi and NOW IS BOOTING NICE
THANKS TO ALL
HAVE A NICE DAY.
MINE IS SMILING
XIPI

I'm also smiling again also
1000 thanks bubbles69
USB>rs232 null modem cable + patched soft worked first time
windows 7, 800HD

DAMN bogus images around the net these days
Thanks for nothing SIM 201team /bricked my box till I found this thread
bubbles69 for President