dm500s red light

[dssunder]

my light is is always on its red and cant power off when i press power button on remote is this normal

[piopat]

you could try unplugging the box and see it the box resets its self (the box should have a green light on it ) if after unplugging the box its still got a red light you will need to reflash it .

an image can be faulty or corrupt and so will not work well if at all ,i suggest you download an image from a different source (before flashing with dreamup perform a flash erase ,flash erase is just above flash in dreamup ) and then flash the box as normal .

the image is corrupt and clearly stopping your box working ,this is most likely the cause of all the issues your having .

[rubiks]

I have same problem red light on front panel ,try to dreamup and no conection can be made. i have null modem cable and none is working.after powering off red light goes of and no light will be on front ,only light is inside box ,then i keep pluging power suply a few times in and out and red light comes on again but can not do nothing.can anyone help plz ,thank you

[Grizz]

Hi Rubiks, welcome to DK. read Piopats post above yours.

[rubiks]

Hi and thank you for quick answer ,the problem is that the dreamup does not "talk" to box.After i left box all night off now only light i get is the ones inside box and none in front panel.
when conect to dreamup it just :conection prepared conect dreambox !Pluged unpluged few times still nothing hapens.
I think it needs to go in bin

[Grizz]

have you tried a few different versions of dreamup? some versions have problems

[rubiks]

I did tried other dreamup no joy, today thought to give it a go on jtag and after soldering all connections one came off pin 3 so no joy with that either