Catseyes ??? where??

[00360362878]

it is very possible that the motor just does not like the receiver. i had the same with my uno. the motor worked fine with my dreamboxes but would not work at all with the uno and had to buy a new one.

Yes I agree with that, you have had 4 different dm's hooked up with the same results, so you have to be looking at that. Or the motor isn't resetting.

[The fat man]

have you tried sat finder with dreambox to see if they can locate a sat and lock on to it

[tonynw]

3 dream boxes up for sale i cant waste any more time on this 4 nights this week and all day today and no further on than when i started.

tonynw.

[00360362878]

Don't give up mate, have a closer look at the motor in the daylight, got to be something on that line.

[tonynw]

have you tried sat finder with dreambox to see if they can locate a sat and lock on to it

satfinder set as predefined with astra 28 2 finds snr 53% and agc 93% and tick in lock box

[00360362878]

Not great signal strength that, I'd say your dish is a little off line. But can you view channels now you have a lock.

[The fat man]

you could try to fine tune your sat position if you want

[mfaraj57]

I have spaniel on my box but where do i find catseyes and how do i install it ??

cheers

tonynw

Now available in TSpanel/sytem tools/settings loader

[tonynw]

Not great signal strength that, I'd say your dish is a little off line. But can you view channels now you have a lock.

no still no view.

tonynw

[00360362878]

You may have answered this but, what motor have got?

[00360362878]

I don't think your dish is looking at the sat you think it is. Just have a look at the hard reset procedure on my motor. The images are not great when opening by just clicking on it. Copy and paste it to a word document.

[tonynw]

You may have answered this but, what motor have got?

fortecstar to go with the fortecstar receiver

this one
| DiSEqC Motor|

tonynw

[tonynw]

I don't think your dish is looking at the sat you think it is. Just have a look at the hard reset procedure on my motor. The images are not great when opening by just clicking on it. Copy and paste it to a word document.

the dish moves and works 100% on 2 other receivers so i can't see how it can be out of line.

tonynw

[00360362878]

the dish moves and works 100% on 2 other receivers so i can't see how it can be out of line.

tonynw

I'm just going off your snr levels, should be a lot higher. When you have the other stb connected and viewing bbc1. Just remove that box and connect the DM, but when you are doing this, have someone watch the dish to make sure it dose'nt move (AT ALL). Theoretically you should the be able to view bbc1 still. Just on another note, when you go into your channel list on the dm, make sure they are accessible and not greyed out.

[tonynw]

I'm just going off your snr levels, should be a lot higher. When you have the other stb connected and viewing bbc1. Just remove that box and connect the DM, but when you are doing this, have someone watch the dish to make sure it dose'nt move (AT ALL). Theoretically you should the be able to view bbc1 still. Just on another note, when you go into your channel list on the dm, make sure they are accessible and not greyed out.

done that on all 3 boxes and no picture,

tonynw