Hi there everyone i was just watching a channel on my dreambox dm500s when the box completley froze. so i turned it off from the back and turned it back on and now all i get is a black screen, the standby light is green? someone please help me fix this thanks
Dreambox DM500S Black Screen!!! :(
Collapse
X
-
hi mate.. i had this when i returned home tonight.. dead easy fix..
unplug box from wall and remove all cables, SCART, Ethernet, Audio etc.. Connect Null Modem cable, run DreamUP on your PC / Laptop then go through the process of flashing an Erase.img (zipped file below).. takes about 13 minutes, then re-flash your backup.img ( i take it you made one..??)
If you dont have a backup.img then you will need to re-flash an image like Gemini 4.2 or Pli..
That will fix it
Attached FilesLast edited by opsmonkey; 2 July, 2010, 23:40.
-
I have the same problem.
I tried to flash my dm 500s with pli-jade using flash wizard but it stacked on 84%.so i close it and restart but now doesn't detect the box.I tried to flash using dreamup and the following msg comes:
"connection prepared,now switch on the dreambox!"
I switch on the box
"upload complete,waiting for acknowledge.."
then after a while another msg comes
"Box does not answer,attach aborted!"
Fro here I cant do any thing.
Pls help on that!
many thxComment
-
only getting fta channels
i had to reflash my dreambox after someone factory reset mine now i only get fta channels dont get any other been at it all week its its open-pli with mgcamd thnx if you can help im climbing up the walls here
Comment
-

Comment