dm500 clone newbie images

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trent1579
    Member
    • Oct 2010
    • 68

    #1

    dm500 clone newbie images

    hi guys i am new to the dreambox world and i have complied this thread to help others newbies, with tools and safe dm500 clone images.

    my dreambox is set up via laptop/ router /dreambox. to config this network i used dream control centre v.2.96 make sure dhcp is enabled on your dreambox receiver via the network ,or communication settings, depending which firmware you have currently installed

    then press the search buttons on the dream control centre page this will assign the ips for you or if you already know the ip of your router and dreambox simply enter the ip of your router and dreambox into the white areas,but you will have to deselect dhcp on your dreambox receiver settings and save then press reconnect on the dcc page

    example of dream control centre:
    this computer xxx.xxx.x.x
    dreambox xxx.xxx.x.x
    router xxx.xxx.x.x
    the last number of each ip should be different

    on your dreambox receiver network settings
    ip :xxx.xxx.x.x
    netmask :255.xxx.xxx.x
    type:lan
    nameserver: ip of router
    gateway:ip of router

    to setup ngrab server on your dreambox receiver enter the same ip as this computer on dream control centre i.e
    xxx.xxx.x.1 ,then press blue button to decect mac address,port will be 4000
    you will then will have to create a new folder on your laptop so that recorded files can go.

    i did this by creating a new folder in documents libary i.e dreambox folder open the new folder and create another new folder i.e recordings
    so it will be somethinmg like this
    documents/dreambox folder/recordings.

    the software you need on your laptop is ngrablite once installed open the software,right click the green icon in
    task bar right hand corner of desktop page,click settings and the folder you created earlier for your recording to go is your target folder then press ok.

    to flash/ patch /upgrade firmware i used flashwizard pro 6.3
    click config and utilities enter dreambox ip into ip underneath dreambox#1 then select install firware into flash memory(YOUR DREAMBOX SHOULD BE TURNED ON NOT STANDBY)
    find the firmware file it will be a .img file on your laptop/pc. it will be in downloads open the rar file to show .img file
    then select yes to upgrade it will state the firmware was successfully terminated.

    please make a note how to access the language menu prior to flash as some will start up in arabic and you will have to find and language menu to change to english



    cheers, hope this helps
    Attached Files
    Last edited by trent1579; 16 January, 2011, 17:54.
  • nacora
    Newbie
    • Feb 2009
    • 6

    #2
    Thanks for the effort and post

    but for me none of the files worked
    Two of them got errors in the unzip and the third (sift) got fatal error message when trying to scan ....
    Going back to Nabilo

    Comment

    • sxnin
      Newbie
      • Dec 2010
      • 2

      #3
      Originally posted by nacora
      Thanks for the effort and post

      but for me none of the files worked
      Two of them got errors in the unzip and the third (sift) got fatal error message when trying to scan ....
      Going back to Nabilo
      It's seems me not only one who will go back on Nabilo

      Comment

      • trent1579
        Member
        • Oct 2010
        • 68

        #4
        clone images

        use win rar ,use firefox,use flashwizard pro 6.3 you will have no trouble

        Comment

        • trent1579
          Member
          • Oct 2010
          • 68

          #5
          Originally posted by sxnin
          It's seems me not only one who will go back on Nabilo
          upload winrar!!

          Comment

          • WATTYUK
            Member
            • Jan 2009
            • 52

            #6
            hig guys is this for the S or C Version? as I have just been givven one of these boxes so thought may be worth trying to get it up and running as i already have a SV7 Super Lan working fine just wondered if there was anyway of getting this box up and running?

            Comment

            • smiley1977
              Newbie
              • Oct 2010
              • 1

              #7
              have an open source dm500 any1 know what image will work

              Comment

              • tyneham
                Newbie
                • Jan 2011
                • 3

                #8
                Thanks for the images. Will try those when I unbrick OpenMedia 500 that was bricked by BlueStar II.

                Comment

                • gawad
                  Newbie
                  • Sep 2010
                  • 1

                  #9
                  I'm a noob, after doing all these am i able to view all FTA and Premium channels? or there are additional steps to do this?...tnx for the post find it helpful

                  Comment

                  • Bazigar007
                    Member
                    • Feb 2011
                    • 74

                    #10
                    Thanks mate just aquired a 500s clone .. will try tyhis threads and let you know how i get on

                    Comment

                    • ftorres
                      Junior Member
                      • Apr 2011
                      • 22

                      #11
                      Weird problem with dm500

                      Hi everybody,

                      By the way on my dm500 skysports 1 and imagine dil se are not working. I took my dm500 to my friends house and the scanning found these channels. Then I brought it home and scanned and imagine dil se was not found. There seems to be nothing wrong with the dm500 as it works at my friends house. However, there seems to be nothing wrong with my satellite dish as well because my sky digital box picks up imagine dil se.

                      I can't figure this out and I've flashed the box many times but the problem persists. Can anybody help??

                      Thanks in Advance

                      Comment

                      • adobeadobe
                        Newbie
                        • Apr 2011
                        • 2

                        #12
                        Check your signal strength. There has been issues with SLY Sports when the signal is not strong. Could it be that?

                        Comment

                        • trent1579
                          Member
                          • Oct 2010
                          • 68

                          #13
                          check your coxial

                          check your coxial connections seems you may have a short

                          Comment

                          • mosnabi
                            Newbie
                            • Feb 2010
                            • 1

                            #14
                            I am going to try this as last .I have been flashing several times::"box flashed successfully",but no image.
                            Any idea?
                            My dm500s blocked,green light on.
                            So I'll check this dm500 clone newbie images.
                            Last edited by mosnabi; 31 May, 2011, 20:23. Reason: Messag not complete

                            Comment

                            • SchoonUK
                              Newbie
                              • Jun 2011
                              • 7

                              #15
                              Hello All

                              I have a feeling ive messed up, I have a DM500-S Clone and ive just put the Evolution 2.7 image on it, And i think i may have bricked it as also i get now is the splash screen and then nothing,

                              I am right in thinking its like the old DBox2 where i can use Dboxflashingservice to put a standard image back on it ?

                              Thanks

                              SchoonUK

                              Comment

                              Working...